Hey sorry but i couldnt figure ot how to post this in the right place. or maybe i dont have access?
anyways

i have a ‘91 1.6L mx5 that will get a ‘95 1.8L engine later on with a mspnp2 and turbo and all that.

right now what my issue is the 1.6 harness.
i think ive got myself into a real problem by trying to do this DIY.

what i wanted was to delete every airbag wire because i dont have any airbags and i wanted to clean up the harness. my end goal was to tuck the wiring harness and have the fuse box and diagnostic box left in the bay and everything else put away neatly. i figured “eh well i dont even have the steering wheel airbag anymore so i don't need the sensors or the desd weight” well i dont know where i went wrong but i did.
i plugged everything back up besides the hvac and radio stuff. also the little plugs for the light dim and the cluster and speedo. basically all the wires/plugs need to run the engine are plugged (or so i think).

now the car turns on but it idles super bad and if i give it gas it stalls. honestly i feel pretty defeated and i think a new untouched harness would fix the problem. i bit off more than i could chew and now im stuck.

does anyone have a 1.6 harness i could buy or could i possibly semd my harness to someone and have it fixed? i really dont know what to do other than that. i really couldnt understand any diagrams and i couldnt find anyone that knew enough about wiring here that could help me. i know i probably shouldve left it alone but i got too ambitious with the wire tuck so now here i am