Anyone have a picture of how they wired up their automatic VTPS? I just want to make sure I have the correct wires going to the correct pics. Searched all last night and couldn't find the info. (I'm doing this without the tps connector)

Thanks!

 

Looks like I'm on my own here. Guess I'll just keep switching wires around until it's right.

 

search is your friend i think braineack has a picture in a thread somewhere

 

To splice in the auto TPS, one would connect the wires thusly:

1- The red wire of the car to the green/red wire of the TPS.
2- The black/green wire of the car to the black/green wire of the TPS
3- The green/white wire of the car to the red/black wire of the TPS
4- The red wire of the TPS is unused.

 

that sounds right.




does this help? too lazy to think right now. the switch idle is not used, you just need a ground, 5vref (5 volts), and the TPS signal.

 

I did search for over an hour and didn't find this info.

Thanks for the help guys!