1.8 NA LC
#1
1.8 NA LC
I know this has been covered a bunch of times, but can someone confirm these are the wires I'm supposed to connect. Wiring scares me cuz I'm a bitch.
How I understand it is the Mslabs ms3 instructions say the launch control input, goes to the ground of the clutch switch. Every write-up I've seen says to tap the brown and white wire coming from the harness to the ECU and be done. This wiring guide shows the clutch switch to be green. The wires coming from the switch is brown/white and black. Am I crazy and this pic is wrong? Idk why it shows br/w and then a line showing green/white.
Is it showing some other options plug being green/white and it's supposed to represent it tapping into the br/w?
I've seen alot of 1.6 write ups but not as many 1.8.
Edit: Does the FM clutch switch override remove the need to unplug the neutral safety wires above the tranny for cars with cruise?
How I understand it is the Mslabs ms3 instructions say the launch control input, goes to the ground of the clutch switch. Every write-up I've seen says to tap the brown and white wire coming from the harness to the ECU and be done. This wiring guide shows the clutch switch to be green. The wires coming from the switch is brown/white and black. Am I crazy and this pic is wrong? Idk why it shows br/w and then a line showing green/white.
Is it showing some other options plug being green/white and it's supposed to represent it tapping into the br/w?
I've seen alot of 1.6 write ups but not as many 1.8.
Edit: Does the FM clutch switch override remove the need to unplug the neutral safety wires above the tranny for cars with cruise?
Last edited by thebigtuna; 04-30-2019 at 05:45 PM.
Thread
Thread Starter
Forum
Replies
Last Post
mylesofsmyles
General Miata Chat
6
11-08-2012 11:49 AM
Chris Swearingen
MEGAsquirt
5
08-18-2009 12:12 PM