Is this still the place to get the fw for the HiRes images including the sensor inputs (Easytherm)?
http://ozmx5.com/viewtopic.php?f=4&t=19

I am going to reflash to see if my IAT correction improves (low temperature idle issues) and thought I would start with a fresh downloaded image.
Dave

 

I grabbed my HR10 from DIYAutotune's big tuning package. Rebuilt my MSQ by hand, never had to easytherm anything. My temps are spot-on.

 

What type of MS do you have...that's really what matters when it comes to the term settings.

if you have a 1.6L standalone MS with no AFM, this will work:

http://www.boostedmiata.com/MS/msq/1...lone_noafm.zip

 

Thanks. Not sure why my idle AFR's fluctuate so much over temperature, hopefully it is something simple (like an issue with my IAT sensor cal).

 

Sorry, I should have mentioned that - MSPNP9093. 1.6 (rebuilt with different cams and pistons but the IAT sensor is the DIYAutotune version).

 

it could easily be your coolant based air density corrections.

 

I did look at those, they match the basemap for the MSPNP9093(noAFM).