6 position boost control
6 position switch (5 x Rotary Switch Potentiometer 2pole 6POSITION 15pin | eBay)
A resistor network. (Chief Delphi - View Profile: ZZII 527) This will give me a 0-5V input in 6 steps. Set this up as a linear sensor in tunerstudio https://www.miataturbo.net/attachmen...ine=1447782724 Set up boost blending. Max boost in table 2, min boost in table 1. Have 6 levels of boost control!! Wooo Same switch can be used for launch control and traction control |
why?
how about just not suck? |
Originally Posted by Braineack
(Post 1284514)
why?
how about just not suck? Why the fuck else would you do it |
fair nuff.
|
:brain:
|
Cool, but even cooler if you set the X axis to react based on Flex%, which is what I plan to do :)
|
Orrrr, you do a dual table flex blend using Blend Curve (8). And the knob based table Blend Curve (6). Then you have 6 positions of boost that also vary based on ethanol content.*
:party: (either way you should be using Blend Curve 8 for Flex blending, because it effects all of the tables.) *I have not tried this. And I'm not at my car to see if the MS freaks out if I set it up like this. |
1 Attachment(s)
Originally Posted by aidandj
(Post 1284547)
Orrrr, you do a dual table flex blend using Blend Curve (8). And the knob based table Blend Curve (6). Then you have 6 positions of boost that also vary based on ethanol content.
:party: (either way you should be using Blend Curve 8 for Flex blending, because it effects all of the tables.) Interested in outcome from both of you. :likecat: |
Mine will be boring. I'm on a stock 1.6. Sav's will be epic.
|
blending both based on ethanol content sounds epic.
work out the details so I can hop on the bandwagon :giggle: |
Details are worked out :)
See flex fuel thread and this thread. |
You have this completely ironed out and working perfectly?
|
I mean in my brain it is, thats pretty much the same right? :D
|
where's the -props button
|
Thankfully gone.
|
:hatecat:
|
I have all of the parts and none of the time :) It will happen eventually.
|
Ive blended boost based on E% on a Rev MS3. I was very happy with the outcome.
Dann |
Yes. Blending boost tables on ethanol % is awesome.
Vlad just for you I'm going to talk yank into doing this on his car. Because he is already running flex fuel and boost control. |
sure :party:
|
All times are GMT -4. The time now is 08:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands