Best outside temperature for VE analyzer tune
#1
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Eindhoven, The netherlands
Posts: 197
Total Cats: 19
Best outside temperature for VE analyzer tune
Whats the best outside temperature to tune with the VE analyzer in tunerstudio. Do i tune it with on a warm day or on a cold day
How well does the megasquirt deal with the temp change?
How well does the megasquirt deal with the temp change?
#2
air density correction should be at 100% when MAT is 70 degrees F. So, tuning around 70F will give the best results.
If your tune goes rich or lean at other temperatures you can use MAT correction to fix this, but it's not always needed.
I think the newer firmwares allow you to actually change the GAIR correction but im not sure.
If your tune goes rich or lean at other temperatures you can use MAT correction to fix this, but it's not always needed.
I think the newer firmwares allow you to actually change the GAIR correction but im not sure.
#3
Senior Member
iTrader: (2)
Join Date: Mar 2014
Location: Meridian, Mississippi
Posts: 628
Total Cats: 44
After you have a good base tune, you have to wait for seasonal changes to finalize things like cold start enrichment. You can get it in the ball park, but it is hard to get that spot on in the summer when "cold" is 50F vs winter when cold is -15F
Keith
Keith
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM