Calling out Braineack and/or Reverent!
06-30-2017, 06:08 PM
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2011
Location: Minot, ND
Posts: 255
Total Cats: 21
Calling out Braineack ! See my plea for help here lol
I know it's a holiday weekend but I've not been able to reach Braineack in a while.
I'm looking to get a diy pnp (pictured below/it may be a ms3x) I had purchased last year from Braineack modified. It's for a 2000 miata. I now have a 2005 Mazdaspeed Miata and want to know if the harness/clips can be simply modified to work with the speed. Hope they see this post. My inbox has been quiet for some time!
Attaching a picture of the ECU.
I'm looking to get a diy pnp (pictured below/it may be a ms3x) I had purchased last year from Braineack modified. It's for a 2000 miata. I now have a 2005 Mazdaspeed Miata and want to know if the harness/clips can be simply modified to work with the speed. Hope they see this post. My inbox has been quiet for some time!
Attaching a picture of the ECU.
Last edited by sickmiatabra; 06-30-2017 at 11:58 PM.
Reply
0
0
06-30-2017, 06:28 PM
#2
Senior Member
Join Date: Nov 2007
Location: Belgium
Posts: 999
Total Cats: 73
you'll have to activate the main relay of the MSM. You normally use a transistor circuit for it, but you could use a spare output instead.
Last edited by WestfieldMX5; 06-30-2017 at 07:07 PM.
Reply
0
0
06-30-2017, 08:11 PM
#3
Retired Mech Design Engr
iTrader: (3)
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,009
Total Cats: 856
To "Call" someone, put their name inside this "utag" tags:
@DNMakinson If you quote it, you will be able to see it (you don't need the =NUMBER inside the first set of brackets)
However, if you want it to call Reverant, you must spell his name correctly. I would say, if Brain built it, he would be the guy for modifying it.
@DNMakinson If you quote it, you will be able to see it (you don't need the =NUMBER inside the first set of brackets)
However, if you want it to call Reverant, you must spell his name correctly. I would say, if Brain built it, he would be the guy for modifying it.
Reply
0
0
06-30-2017, 11:52 PM
#5
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2011
Location: Minot, ND
Posts: 255
Total Cats: 21
To "Call" someone, put their name inside this "utag" tags:
@DNMakinson If you quote it, you will be able to see it (you don't need the =NUMBER inside the first set of brackets)
However, if you want it to call Reverant, you must spell his name correctly. I would say, if Brain built it, he would be the guy for modifying it.
@DNMakinson If you quote it, you will be able to see it (you don't need the =NUMBER inside the first set of brackets)
However, if you want it to call Reverant, you must spell his name correctly. I would say, if Brain built it, he would be the guy for modifying it.
[utag]braineack[utag] is that right?
Reply
0
0
07-01-2017, 01:29 PM
#9
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2011
Location: Minot, ND
Posts: 255
Total Cats: 21
Trying this again. @Braineack
Hope you see this soon. I've been able to reach Reverant, but as expected, said I'd need to come to you for the modification. So now from glancing through the responses, it just needs to be converted to a nb2 connector? I know these are the problems I face trying to boost on a budget but I hope this is an easy fix.
*praying this damn tag thing works lol.
Hope you see this soon. I've been able to reach Reverant, but as expected, said I'd need to come to you for the modification. So now from glancing through the responses, it just needs to be converted to a nb2 connector? I know these are the problems I face trying to boost on a budget but I hope this is an easy fix.
*praying this damn tag thing works lol.
Reply
0
0
07-01-2017, 01:46 PM
#10
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,177
Total Cats: 1,681
trubokitty.com will tell you all the info you need on how to do this. You need to buy a NB2 connector, chop off the old one. Then wire it up as directed for you car on the link I gave you.
Reply
0
0
07-01-2017, 01:55 PM
#11
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2011
Location: Minot, ND
Posts: 255
Total Cats: 21
I'm willing to pay to have it done professionally but I'll research this now as my builder is MIA and that's okay.
Reply
0
0
07-01-2017, 02:09 PM
#12
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2011
Location: Minot, ND
Posts: 255
Total Cats: 21
@shuiend I glanced at the site and am 100% I can not complete that tasks. Wiring/ schematics do not sit well with me. I've never soldered anything in my life let alone built an ECU. I would do more harm than good if I even attempted to pull that off.
I'll continue to wait on Scott for a response. I'd rather pay to have this done right then potentially cause an electrical fire and ruin and ECU. When I say I have zero experience with this kind of stuff, it's the absolute truth. Not asking for a spoon feed. Looking for the job to get done right !! My mazdaspeed is lacking a real ECU.
I'll continue to wait on Scott for a response. I'd rather pay to have this done right then potentially cause an electrical fire and ruin and ECU. When I say I have zero experience with this kind of stuff, it's the absolute truth. Not asking for a spoon feed. Looking for the job to get done right !! My mazdaspeed is lacking a real ECU.
Reply
1
1
07-03-2017, 02:11 PM
#14
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2011
Location: Minot, ND
Posts: 255
Total Cats: 21
I've made contact with Braineack finally! All is well and will be an easy process it sounds like. BTW @concealer404 Those are Konig Hypergrams
Reply
0
0
07-03-2017, 05:33 PM
#18
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2011
Location: Minot, ND
Posts: 255
Total Cats: 21
For the price, looks, and "light weight" you really can't complain. There's always the advanti storm's.
Reply
0
0
