can Ms take care of:
09-13-2006, 04:29 PM
#1
Tour de Franzia
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
can Ms take care of:
boost timing retard
knock retard
what is the tuning/user interface like, and what do I have to buy to get this thing tuned (cables, adapters). I will use a unit prepped by "kingof1337."
knock retard
what is the tuning/user interface like, and what do I have to buy to get this thing tuned (cables, adapters). I will use a unit prepped by "kingof1337."
Reply
0
0
09-14-2006, 02:38 AM
#5
Junior Member
Join Date: Nov 2005
Location: Down Under
Posts: 252
Total Cats: 0
I forgot to mention, once you have downloaded MegaTune, you should also download one of the current versions of MSnSE (either 029t or 08g (Hi-res)) and run the edit-settings dos application to change MegaTune from the standard version of the code to the MSnSE version of the code. That way you will be able to see exactly what you will be able to play with once you get the ECU installed.
Reply
0
0
09-14-2006, 05:03 PM
#7
Junior Member
Join Date: Nov 2005
Location: Down Under
Posts: 252
Total Cats: 0
I have found the hi-res code to be a lot more smoothererer (it's a hard thing to describe accurately, maybe I could also say it feels more 'factory'), and it's also great for fuel consumption.
Last edited by Aussie Driver; 09-15-2006 at 04:35 AM.
Reply
0
0
09-18-2006, 10:25 PM
#13
Senior Member
Join Date: Dec 2004
Location: Brisbane, Australia
Posts: 1,278
Total Cats: 37
Aussie, can you use the fancy idle code with the high res stuff?
Edit: I read through the thread, instead of just the first post!
Looks like good stuff!
Cheers
Edit: I read through the thread, instead of just the first post!
Originally Posted by Keithg
Theoretically, nothing is missing except low inpedance injector PWM control.
i.e. all ignition seems to work as in the 029 codes.
Most features have been tested. Ones I am not sure of are: traction control, water injection and NOS. If they do not work, we need to fix them as they should work just fine. Staged injection works in hires now, but the transition code is not yet in the code (that softens the transition to the second injectors).
i.e. all ignition seems to work as in the 029 codes.
Most features have been tested. Ones I am not sure of are: traction control, water injection and NOS. If they do not work, we need to fix them as they should work just fine. Staged injection works in hires now, but the transition code is not yet in the code (that softens the transition to the second injectors).
Cheers
Last edited by timk; 09-19-2006 at 12:50 AM.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
