I went from a M45 with 305cc injectors to a MP62 ported by Track Dog Racing and with RC 550cc injectors.

I got a basemap from TDR but it's not working right. Car idles rough with AFR of about 10.5:1. So I'm using my old tune and just copied and pasted his AFR, Fuel, and Timing maps. I changed the fuel requirement from 13 to 5.8.
I don't know what to put in for dead time so I left it at 1.000.

Anything else I should change before I try it on my car?
How does my dwells look?
My "general settings" and "sequential injection" also looks different from TDR's.

My tune was initially created by a Honda guy so I'm not too sure about his work.

 

The above .msq didn't work. Car cranks but doesn't fire up.
Tried using my old .msq and only changed the fuel requirement to 5.8, 6.0, 7.0.
Same thing. Cranks but does not start.
Here's my old .msq

 

Here's the tune I got from TDR.
It starts up but the car shakes and vacuum is at 10 as well as the afr.

 

If vacuum is at 10, that should have nothing to do with the tune. You most likely have a vacuum leak at the injectors.

 

I'll double check the injectors.
When installing the rc550 I reuse the black ring from my old injectors right?
Or do they sell special ones?

 

Just did a search and apparently air leaks from rc 550 using the stock seals are a common problem. Since the pintle is a different size.
Napa p/n 2-12076 should fix the problem.