Crank but no start 91 miata with 1.8 swap. PLS Help
1 Attachment(s)
I have a 91 miata with a 1.8 swap and megasquirt now installed and I am having trouble getting the car to start. Also i went and pulled back on the throttle and tuner studio now says offline and will not reconnect.
|
Which Megasquirt? Any custom wiring? Has the car run on Megasquirt before the swap? Figure out if you have power getting to the ECU. If you do, take a composite log to see if you have crank/cam sensors. If that checks out, check for fuel/spark.
|
Its Ms pnp2
No custom wiring It ran on the stock ecu after the swap for a year |
i guarantee you that you have the spark plug wire order wrong. I had the same issue. use the 1.6 wiring order. not the 1.8
|
So what is the order exactly
https://cimg6.ibsrv.net/gimg/www.mia...d5e294b079.jpg |
Yep order is wrong, one second and ill show you how i have mine routed.
|
1 Attachment(s)
try this and report back
|
you will have to play around with different plug lengths, kind of annoying.
|
So then would it matter if I had the 1.6 base map vs the 1.8 base map
|
Originally Posted by BRG_Dylan
(Post 1545658)
So then would it matter if I had the 1.6 base map vs the 1.8 base map
|
Ok so I should use the 1.8 map?
|
Originally Posted by BRG_Dylan
(Post 1545666)
Ok so I should use the 1.8 map?
|
I've been getting there errors aswell
|
Originally Posted by BRG_Dylan
(Post 1545671)
I've been getting there errors aswell
BOII.... Wut. |
https://cimg7.ibsrv.net/gimg/www.mia...c5f941fe9e.jpg
also when the throttle pedal is pulled backwards it doesnt detext the ecu but then when u push it in and then let it come back on its own it detects it. But the gauge thinks the throttle is at 30% |
Originally Posted by BRG_Dylan
(Post 1545674)
https://cimg7.ibsrv.net/gimg/www.mia...c5f941fe9e.jpg
also when the throttle pedal is pulled backwards it doesnt detext the ecu but then when u push it in and then let it come back on its own it detects it. But the gauge thinks the throttle is at 30% |
No I dont, I'm using the stock mazda one
|
Originally Posted by BRG_Dylan
(Post 1545678)
No I dont, I'm using the stock mazda one
|
Couldnt get it to start. I have the injector settings changed and i moved the plug wires but still nothing
|
Does it matter that it's the 1.6 coil pack
|
All times are GMT -4. The time now is 02:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands