Miata Turbo Forum - Boost cars, acquire cats.
Page 2 of 2
1
2
Show 60 post(s) from this thread on one page

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   MEGAsquirt (https://www.miataturbo.net/megasquirt-18/)
-   -   Crank but no start 91 miata with 1.8 swap. PLS Help (https://www.miataturbo.net/megasquirt-18/crank-but-no-start-91-miata-1-8-swap-pls-help-100899/)

Oil Leak 08-13-2019 03:24 PM
Originally Posted by BRG_Dylan (Post 1545686)
Does it matter that it's the 1.6 coil pack
Load the 1.6 map, change the displacement to 1800cc, and see if it starts that way.

acedeuce802 08-13-2019 03:25 PM
Take a composite log.

BRG_Dylan 08-13-2019 03:29 PM
can you please explain how to do a composite log, is it just like normal data logging

Oil Leak 08-13-2019 03:46 PM
try moving your cam angle sensor around to different locations and see if it gets closer to firing, may just be off.

acedeuce802 08-13-2019 04:46 PM
Originally Posted by BRG_Dylan (Post 1545690)
can you please explain how to do a composite log, is it just like normal data logging
Diagnostics tab, enter in a file name, press start. Then try to crank and 3 squiggly lines will show up. Screenshot that and post it.

BRG_Dylan 08-13-2019 05:22 PM
1 Attachment(s)
I ran the log and it didnt give me 3 lines all it did was make me this spreadsheet but here it is.

acedeuce802 08-13-2019 07:47 PM
There's no data there. Either you didn't crank long enough, or you're not getting any cam/crank signal.


All times are GMT -4. The time now is 02:25 PM.
Page 2 of 2
1
2
Show 60 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands