crank but no start. Attached composite log
 

Hi guys. New day new problem. I got everything ready to start the car now but it only cranks but no start. I have attached the tune and composite log so i hope someone can help me out here.

Oops this happened. Will replace it on Monday. Hope they have this in stock.

I might have found the issue. My fuel lines are swapped. Does the fuel input goes to the rail and the return line comes from the regulator?

Fuel line closer to firewall to rail, return line from the regulator.

did you do a motor swap?

yes i did. vvt to 95 miata

Still no start :\

made a build thread here

https://www.miataturbo.net/build-thr...6/#post1433110

so here's an update:

i got spark and fuel. I emailed Dimitris and he said my cranking angle is too high at 20* so I changed to 8*. He also mentioned that my rpm while cranking is only at 120rpm while it should usually be at 200-250ish. I swapped my current NB starter with my NA starter and it's at 180ish rpm now while cranking but still no start. I smell fuel but no spark. I have tried 2 batteries and they both couldn't get my rpm over 180.

Any suggestions? I am trying my best to get the car running. :(