You need to use the .inc file
Code:
; Generated using EasyTherm4.exe, |
Sorry, typo; that's what I've been using/showing.
Very odd. Your file has different values. I can only assume that my file at home has the same as yours then. It looks like DIY's most recent software package includes a different/new matfactor.inc. |
So has anyone tried to use the USB mod to MS and palmlog?
|
I run the USB MS deal. Either the driver packet is kind of glitchy or i have reset issues cause it likes to drop com on me sometimes.
|
Originally Posted by magnamx-5
(Post 166614)
I run the USB MS deal. Either the driver packet is kind of glitchy or i have reset issues cause it likes to drop com on me sometimes.
|
Ben, hows the process getting files off the palm to the comp using the CF card?
|
:dunno: I don't have a card
|
Originally Posted by Ben
(Post 166570)
The correct ones? See post 69.
CJ, don't be rediculous. We did all the hard work, and anyone w/ a mspnp w/ a 2.5bar sensor can simply copy the settings listed. And I *think* I've got the 4 bar map settings, but it's too hard to drive and check in boost, especially because it's wet out. I'll post the new settings as soon as I can verify. Pretty badass you guys got it working. |
I originally posted the values I have been using on my palm since the thread began. Ben wanted to get MAP values for using his 4-bar sensor, where mine is the standard 2.5-bar. While going through that ordeal, he proposed updated settings for the 2.5-bar MAP sensor. Somebody asked about my CLT values, and while double-checking them, I downloaded the MSPNP software bundle to check out the .inc files, where the AIR values were much different. The original matfactor.inc file matches what I originally posted, however.
I'm still not sure why, if you go to the megasquirtpnp.com site right now and download the software bundle, the matfactor.inc file is different than what came bundled with my MSPNP (for w/o AFM). That's the summary. |
That was an update to improve the accuracy of the IAT reading.
|
So I'm not crazy! Thanks for relieving me of my self-doubting ;)
I think I'm going to go ahead and replace my matfactor.inc file and switch values on the PalmLog. |
Thanks Matt. Then I assume that you suggest that we should update the older matfactor settings to the new settings? Is there anything to be made aware of?
|
Correct MAP sensor values for PalmLog:
2.5 bar, standard MS sensor, included in 90-93 PNP Scale: .964 Offset: 9.108 4.0 bar, upgrade sensor for MS and 90-93 PNP, included in 94-95 PNP Scale: 1.62 Offset: 4 The 2.5 bar settings above will be the default settings in the next version of PalmLog. |
Originally Posted by Ben
(Post 167292)
The 2.5 bar settings above will be the default settings in the next version of PalmLog.
|
Yeah, I guess, Maybe, I dunno :dunno:
Originally Posted by the dude who wrote the software
kPa = .964 x adc + 9.108, which is off a bit from the 0.984, 9.0 shown as defaults. I'll update this with the next release.
|
Sweet, I've got an old Palm I could try this on. This would be awesome for tuning cold start settings I reckon.
|
May as well get this dope wars game too. It is highly addictive. http://www.download.com/DopeWars-Pal...-10500611.html
|
All times are GMT -4. The time now is 02:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands