What settings do I use for the IAT/CLT on Easytherm if I have the stock MAF on a 96? I think it is flashed for the GM AIT right now, I got it running but it is stumbling in the midrange RPMs. Thanks!

 

https://www.miataturbo.net/megasquirt-18/96-coolant-sensor-curve-55633/

Bias resistor value will depend on if u are parallel or standalone.

 

Hi MS fellow users,

I have a 94 1.8 Miata I am stuck with Easytherm to configure the CLT/IAT Settings.

GM IAT from diyautotune

Standalone Bias Resistor both 2490ohm
IAT: 48F - 7000ohm CLT: -4F - 16150ohm
87F - 1930ohm 104F - 1150ohm
146F - 560ohm 176F - 330ohm

Is it correct?

My problem, I fill everthing in Easytherm out, then it says Output done and after that when I wanna dowload it to Megasquirt, I got a Runtime error:

"Runtime error 13: Type mismatch"

And it doesnt generate the 3 inc files....

Any help would be appreciated.....

 

Now I've figured out, I have to change the local settings and keyboard and timezone to US, and then its worked...

But, it didnt generate the 3 inc files in the easytherm folder....

I've tried with easytherm 4f and 5v version too.....

 

Meanwhile, I've solved the problem, I also had to change the output directory for .inc files...