Maybe someone here knows how to fix my fuel scaling. I am using the megatune and base map from DIYautotune. My VE fuel scaling goes from 20kpa up to 263 kpa. My tuners laptop only goes up to about 140 using the same program. My car is boosting only 7 psi and goes all the way to the top row and I know that's wrong. So why does my laptop and his laptop have different scaling if we're using the same software from the same site?

Also after tuning my car has been realy hard to cold start. It starts then dies, starts then dies, untill it's warm enough or has enough fuel to stay running. My wide band shows that I need more fuel during cold start how can I change this?

 

it's all relative to the tune you have loaded. you can rescale your table however you want.

for example, in MS-I, I use 3 boosted rows: 128, 184, 212. They rest 26-100 I scaled to give myself better cruising resolution.

 

Well it's weird because at full boost it will be like 140 kpa on his computer (top row) and 263 kpa top row on mine also. It's like it just ignores it.

 

What sort of MAP sensor are you running? Make sure it's set for that in the Configurator or the MAP will read incorrectly.

 

ah, that's makes much more sense. sounds like your laptop is set for 4-bar the other for the 2.5 bar, considering your map shouldn't even go above 250kPa.