Change output 1 to match what output 2 has filled in on the example:

http://www.msextra.com/manuals/MS_Ex...outputs1-2.JPG

If you do this, and setup the "codebase and output functions" like Matt walks you through, output 1 will trigger to ground when the coolant temp is above 200F. The output will stay on until the coolant goes below 195F.

Thanks. He sent me to the Megamanual site and I didn't really understand what I was looking for.

Hopefully this will work. Thanks Brain.

ok, so now the fan randomly turns on, stays on, and stays on when I pull the fan relay and fan fuse WTF?

Both fans come on, so I assume its a problem with the air conditioning circuitry...however I can plan "on/off" with the ac control and eventually it will turn off.

I can run it on output 1 (x4) and the fan turns on wherever I set it... but it never turns off unless I jack with the AC controls. WTF?

this just in...now its cycling properly (twice, in a row!!!). WTF is going on?