whats your base settings for initial start up?
#1
Senior Member
Thread Starter
Join Date: Jan 2011
Location: sacramento ,ca
Posts: 564
Total Cats: 162
whats your base settings for initial start up?
i have a turbo bp using miata 1.6 cas sensor, 1.6 coil and igniters. im using turbo coupe 370cc injectors with a resistor pack. i copied my buddies tune from his megasquirted miata but its not working, it keeps backfiring like a shotgun and not starting. we got it to idle but it only idles for maybe 45sec then stops running and wont restart. if you try to give it gas while its idling it instantly dies...
ive checked for vacuum leaks and found none.
ive checked for vacuum leaks and found none.
#5
Senior Member
Thread Starter
Join Date: Jan 2011
Location: sacramento ,ca
Posts: 564
Total Cats: 162
ok so now i have everyt thing reading correctly. now it cranks and doest start. it back fires like a shot gun sometimes. when cranking and will sputter and try to start but wont start. i pulled the spark plugs and they are fouled pretty bad... i cleaned them but it didnt change anything. ive been working on this for a few days but i cant figure this thing out.
i dont know how to post data logs or tunes.
i dont know how to post data logs or tunes.
Thread
Thread Starter
Forum
Replies
Last Post
Motorsport-Electronics
ECUs and Tuning
0
09-05-2015 08:02 AM