How to datalog when the A/C clutch cycles
#3
Retired Mech Design Engr
iTrader: (3)
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,009
Total Cats: 857
Look at the documentation for the MS that you have (if you have a MS). It will be titled something like this: Megasquirt3_TunerStudio Lite Reference Guide. Available from MSEXTRA.com.
Find the Status Info, like this:
In this case, AC is called for when Status 7 = 32 (or some combination of, say 33 = 32 + 1 if you have more than one thing at a time). Thus, you would log Status 7 and look for when it jumps to 32 or higher.
DNM
Find the Status Info, like this:
In this case, AC is called for when Status 7 = 32 (or some combination of, say 33 = 32 + 1 if you have more than one thing at a time). Thus, you would log Status 7 and look for when it jumps to 32 or higher.
DNM
#4
Look at the documentation for the MS that you have (if you have a MS). It will be titled something like this: Megasquirt3_TunerStudio Lite Reference Guide. Available from MSEXTRA.com.
Find the Status Info, like this:
In this case, AC is called for when Status 7 = 32 (or some combination of, say 33 = 32 + 1 if you have more than one thing at a time). Thus, you would log Status 7 and look for when it jumps to 32 or higher.
DNM
Find the Status Info, like this:
In this case, AC is called for when Status 7 = 32 (or some combination of, say 33 = 32 + 1 if you have more than one thing at a time). Thus, you would log Status 7 and look for when it jumps to 32 or higher.
DNM
Thread
Thread Starter
Forum
Replies
Last Post