kingofl337

I just built my MS-II, it going to run parallel so I followed ARGA's 2n2222a transistor CAM/CRANK inputs and now I'm looking for turbo MAPs. Could someone post what they have MS-I or MS-II. I can use the 96-97 PNP map I guess but a real NB map would be better.

Also, where did you run the hose for the MAP source on you NB?

patsmx5

iTrader: (16)

No decent maps here. I hooked the vacuum hose to the intake manifold. Well, specifically there's a spot on the back I believe that's capped off (not used). Just take that off and slide on the hose.

cjernigan

iTrader: (13)

My hose runs through a grommet in the firewall to the left of the brake master.

One of my MSQ's is in this folder. http://tokrv.net/cjernigan/10G.zip

kingofl337

Found the grommet, it's between the break and clutch master. I had to notch the clutch pedal assy to pass the hose through, pretty easy though

cjernigan

iTrader: (13)

Weird, mine isn't between the two cylinders. Mine is to the passenger side of the brake master. Much easier to access.

mikeflys1

iTrader: (2)

Yea mines run through there too...where the cruise control line originally went through.