If I blip the throttle at idle, car stalls. MS3 NB
Thread Starter
Junior Member
Joined: Dec 2017
Posts: 57
Total Cats: 8
If I blip the throttle at idle, car stalls. MS3 NB
I have a new MS3 I've been working on getting some kinks out, and I'm not sure where I screwed up. The car idled fine earlier today, but something I did screwed it up and I'm not sure where. All I was doing was some VE tuning. Could someone take a look at my file and see if something stands out as incorrect?
Car is a 1.8L 01. Rev pnp ms3. Small saab td25 turbo.
FWIW, when it's idling, the RPM is fairly steady and AC and fan bumps work just dandy. IF I pull out and start driving, it picks up just fine. The only issue seems to be if I'm sitting still and blip the throttle, as the RPMS drop, they just keep dropping.
with
One thing I think I need to check for certain is re-setting the idle set screw and throttle stop. This might be dumb, but when I do that I need to set idle valve to none and idle timing advance shut off, right?
Car is a 1.8L 01. Rev pnp ms3. Small saab td25 turbo.
FWIW, when it's idling, the RPM is fairly steady and AC and fan bumps work just dandy. IF I pull out and start driving, it picks up just fine. The only issue seems to be if I'm sitting still and blip the throttle, as the RPMS drop, they just keep dropping.
with
One thing I think I need to check for certain is re-setting the idle set screw and throttle stop. This might be dumb, but when I do that I need to set idle valve to none and idle timing advance shut off, right?
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
