MS3 Install - 3500RPM Idle - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to Miataturbo.net   Members
 


MEGAsquirt A place to collectively sort out this megasquirt gizmo

Reply
 
 
 
LinkBack Thread Tools
Old 04-04-2015, 11:38 PM   #1
Junior Member
Thread Starter
 
Join Date: Dec 2010
Location: Phoenix
Posts: 146
Total Cats: 3
Default MS3 Install - 3500RPM Idle

I bought an MS3 from Brain and am installing it this weekend. Everything went OK per Brain's instructions, until the part where you first turn on the car.

It fires right up, but the car idles at 3500RPM. I let it idle there for ~15sec and shut it off. Tried again, same result (see datalog). Is this normal before you set the timing in TunerStudio? I didn't set it yet, in case there is some other problem. Also, the AFRs were really lean (around 17) - not sure if that's relevant.

Any ideas what I should be looking for? The ECU install was pretty simple with the PNP harness, but I will double-check the wiring tomorrow.
Attached Files
File Type: zip 2015-04-04_19.05.28.zip (24.0 KB, 6 views)
Nate99 is offline   Reply With Quote
Old 04-05-2015, 04:58 AM   #2
Senior Member
iTrader: (1)
 
Join Date: Apr 2011
Location: Columbia, SC
Posts: 1,342
Total Cats: 78
Default

Tune as well por favor. You're Idle PWM duty never changes, so I'm assuming you're never entering Closed-Loop.
Attached Thumbnails
MS3 Install - 3500RPM Idle-nate99.png  
Schuyler is offline   Reply With Quote
Old 04-05-2015, 10:21 PM   #3
Junior Member
Thread Starter
 
Join Date: Dec 2010
Location: Phoenix
Posts: 146
Total Cats: 3
Default

MSQ attached. How long does it typically take to go into closed loop? I only ran the car for a few seconds.
Attached Files
File Type: zip 2015-04-05_18.14.13.zip (24.6 KB, 5 views)
Nate99 is offline   Reply With Quote
Old 04-06-2015, 10:52 AM   #4
Boost Czar
iTrader: (61)
 
Braineack's Avatar
 
Join Date: May 2005
Location: Chantilly, VA
Posts: 72,846
Total Cats: 1,787
Default

your idle duty should be around 20%. as logged, that's stuck wide open.

ill review your msq tonight.
Braineack is online now   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Buzzing from driver side of engine bay? (MS3 install) nick470 MEGAsquirt 7 06-16-2017 02:53 PM
OTS Bilstein to motorsports ASN conversion stoves Suspension, Brakes, Drivetrain 5 04-21-2016 04:00 PM
WTB MP62 (Hotside) (NB2) Rick02R WTB 3 01-03-2016 08:18 PM
Time to start learning and play with tuning The Gleas MEGAsquirt 3 10-01-2015 10:30 AM
Walbro 255lph Fuel Pump $50 lsc224 Miata parts for sale/trade 2 10-01-2015 10:17 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 06:16 PM.