ignition problem. spark outputs are going to the wrong i/o
#1
ignition problem. spark outputs are going to the wrong i/o
MSPNP2
NA 1994 with NA coils, BP engine
Ignition A goes to coil 1 and has spark
Ignition B goes to coil 3 and has spark
Ignition C coil 4 and D coil 2 do not have spark. in test mode they activate the fan and a clicking sound from fuse box.
Symptoms are so much like it is sending sequential but it is set to wasted spark and the wiring was not altered.
something to do with the output1, output2 , aled, wled i/o?
really don't know where this is going wrong and can't find any option in tunerstudio.
NA 1994 with NA coils, BP engine
Ignition A goes to coil 1 and has spark
Ignition B goes to coil 3 and has spark
Ignition C coil 4 and D coil 2 do not have spark. in test mode they activate the fan and a clicking sound from fuse box.
Symptoms are so much like it is sending sequential but it is set to wasted spark and the wiring was not altered.
something to do with the output1, output2 , aled, wled i/o?
really don't know where this is going wrong and can't find any option in tunerstudio.
Last edited by PReddy; 10-15-2020 at 06:13 PM.
Thread
Thread Starter
Forum
Replies
Last Post