is this megasquirt built correctly
07-23-2017, 02:13 PM
#1
Newb
Thread Starter
Join Date: May 2017
Posts: 3
Total Cats: 0
is this megasquirt built correctly
Hello everyone, i build this megasquirt based on this guide
Megasquirt 2 Assembly - Miata Turbo FAQ
its suppose to be built for a 1990 eunos 1.6.
however, my car refuses to start on inverted spark, it starts on normal spark but does not run well, or is drivable by anymeans and does not idle,
also another main problem i am having is tuner studio is seeing nearly double the rpm then my stock cars tach.
any help would be greatly appreciated as i am close to giving up with this, been at it for ages and now thinking i should have just gone with the pnp route.
Ali
Megasquirt 2 Assembly - Miata Turbo FAQ
its suppose to be built for a 1990 eunos 1.6.
however, my car refuses to start on inverted spark, it starts on normal spark but does not run well, or is drivable by anymeans and does not idle,
also another main problem i am having is tuner studio is seeing nearly double the rpm then my stock cars tach.
any help would be greatly appreciated as i am close to giving up with this, been at it for ages and now thinking i should have just gone with the pnp route.
Ali
Reply
0
0
07-24-2017, 12:41 AM
#2
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,176
Total Cats: 1,680
I would honestly just suck it up and buy the MS3 daughterboard and expansions board. Then follow the guide on trubokitty.com for building a MS3X for you model year. You will get much more help and support, as next to no one runs regular ms2's in the miata world, and a whole host of better options and tuning ability with the MS3X.
Reply
0
0
