mxstacy

I have a nb1 and I just installed Mega Squirt but she is not starting. I dont have the maf installed. Anyone know the proper settings for megasquirt to start with out a maf. Thank You!

Akina_Downhill

iTrader: (1)

Most ms set-ups don't use a maf. There are many reasons for a no start situation, search the forum.

ryansmoneypit

iTrader: (6)

Uploading the tune always helps too. Gives us something to look at.

DNMakinson

iTrader: (3)

Go to MSExtra, download the theory of operation for MS and Speed Density fueling. Read it. Try to understand it.

Download the Setting Up Manual and Tuner Studio Manual for the MS that you have. Read them. Try to understand them.

Make sure you have a tube running from your Imtake manifold to your MS MAP sensor.

Download the appropriate basemap from Trubokitty.com.
Load it onto your laptop and into your MS.

Then it might be safe for you to try to start your car, and drive it gently.

DNMakinson

iTrader: (3)

Go to the Meet and Greet section and start an introduction thread. Tell us about you, your car, your goals. Post some pics of your car is nice as well.

mxstacy

Ok will do. Thanks for the help!

DNMakinson

iTrader: (3)

EDIT: Removed as previous advice was better.

2nd EDIT: This is old, but gives an over-view of Speed-Density and MS operation: http://www.megamanual.com/v22manual/mfuel.htm