Notices
MEGAsquirt A place to collectively sort out this megasquirt gizmo

MS3 Enhanced, No start on basemap

Old Sep 26, 2016 | 08:40 PM
  #1  
jesssssssay's Avatar
Thread Starter
Newb
 
Joined: Aug 2015
Posts: 17
Total Cats: 0
Default MS3 Enhanced, No start on basemap

Hey, I have a 04 MSM with just Basic Bolt ons, intake, 2.5" turbo back, wideband, etc.
Just installed an MS3 Enhanced bought from Reverant.
The issue I'm having is, the car fires up, like it starts, but it immediately dies. Even adding throttle, it still dies. Can i get some guidance on where to check and what to change on TS?
Let me know what you guys need to see so I can post it. Any help would be appreciated.

My car had no starting issues when it was on stock ECU. Just to rule out my car being the problem to begin with.
Old Sep 26, 2016 | 08:48 PM
  #2  
jesssssssay's Avatar
Thread Starter
Newb
 
Joined: Aug 2015
Posts: 17
Total Cats: 0
Default

Attached is the basemap Rev just sent me. If someone can look at it, give me some ideas where its going wrong in the middle
Attached Files
File Type: msq
CurrentTune FROM REV.msq (225.1 KB, 141 views)
Old Sep 26, 2016 | 10:56 PM
  #3  
Godless Commie's Avatar
Elite Member
iTrader: (2)
 
Joined: Jun 2009
Posts: 3,227
Total Cats: 1,707
From: Istanbul, Turkey
Default

reqfuel?
Old Sep 26, 2016 | 11:17 PM
  #4  
jesssssssay's Avatar
Thread Starter
Newb
 
Joined: Aug 2015
Posts: 17
Total Cats: 0
Default

11.6
Old Sep 26, 2016 | 11:21 PM
  #5  
Godless Commie's Avatar
Elite Member
iTrader: (2)
 
Joined: Jun 2009
Posts: 3,227
Total Cats: 1,707
From: Istanbul, Turkey
Default

Originally Posted by jesssssssay
11.6



Old Sep 27, 2016 | 02:08 AM
  #6  
Reverant's Avatar
Elite Member
iTrader: (10)
 
Joined: Jun 2006
Posts: 6,020
Total Cats: 369
From: Athens, Greece
Default

Datalog please.
Old Sep 27, 2016 | 11:18 AM
  #7  
jesssssssay's Avatar
Thread Starter
Newb
 
Joined: Aug 2015
Posts: 17
Total Cats: 0
Default

Whats wrong with 11.6? What is it supposed to be in for stock MSM injectors?


[QUOTE

=Godless Commie;1363689] [/QUOTE]
Old Sep 27, 2016 | 11:19 AM
  #8  
jesssssssay's Avatar
Thread Starter
Newb
 
Joined: Aug 2015
Posts: 17
Total Cats: 0
Default

Will datalog when go to lunch. Then I'll post here.

i also haven't set the base timing yet. Would that affect start up for not setting it yet?
Old Sep 27, 2016 | 11:23 AM
  #9  
Godless Commie's Avatar
Elite Member
iTrader: (2)
 
Joined: Jun 2009
Posts: 3,227
Total Cats: 1,707
From: Istanbul, Turkey
Default

Nevermind.

I missed the stock injectors part.
just a brainfart.
Old Sep 27, 2016 | 01:50 PM
  #10  
jesssssssay's Avatar
Thread Starter
Newb
 
Joined: Aug 2015
Posts: 17
Total Cats: 0
Default

Heres the Datalogs Reverant,

Start up#2 i was able to get the car to start by adding throttle, then i went to low on it then died.

Start up#3 is just regular cranking, trying to start up but dying.
Attached Files
Old Sep 27, 2016 | 02:09 PM
  #11  
Reverant's Avatar
Elite Member
iTrader: (10)
 
Joined: Jun 2006
Posts: 6,020
Total Cats: 369
From: Athens, Greece
Default

Please also attach your current tune: File -> Save tune as.
Old Sep 27, 2016 | 02:31 PM
  #12  
jesssssssay's Avatar
Thread Starter
Newb
 
Joined: Aug 2015
Posts: 17
Total Cats: 0
Default

My current tune loaded is the 2nd post of this thread. It's the one you sent Brett.
Old Sep 27, 2016 | 08:09 PM
  #13  
jesssssssay's Avatar
Thread Starter
Newb
 
Joined: Aug 2015
Posts: 17
Total Cats: 0
Default

The first map is the map that came with the ECU when you shipped it to me.

Few days later when Brett Willet asked for the basemap you gave the 2nd one.

Both of them fires the car, but won't let it idle. It just dies.
Attached Files
File Type: msq
CurrentTune FROM REV.msq (225.1 KB, 169 views)
Old Sep 29, 2016 | 12:46 PM
  #14  
TheIglu's Avatar
Junior Member
 
Joined: Mar 2016
Posts: 59
Total Cats: 5
From: North Central MA
Default

Did you unplug the stock EBC?
Old Sep 30, 2016 | 03:19 PM
  #15  
VcrMiata's Avatar
Newb
 
Joined: Dec 2011
Posts: 29
Total Cats: 6
Default

Notice that your posted tunes are using Falling Edge for the Ignition Input Capture.

My 05 MSM with Rev MS3 Basic uses Rising Edge.
I just tried setting mine to Falling Edge and it won't start at all with that setting.

Caveat: I don't know if MS3 Enhanced needs a different setting.
Old Sep 30, 2016 | 10:09 PM
  #16  
jesssssssay's Avatar
Thread Starter
Newb
 
Joined: Aug 2015
Posts: 17
Total Cats: 0
Default

Everything is good now, the car finally starts!! Reverant teamviewed me, he changed a lot of **** that I don't remember but all that matters is it starts now!

thanks again Rev! Very much appreciated!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RockHead
ECUs and Tuning
19
Apr 6, 2017 12:08 PM
L3mur
MEGAsquirt
10
Sep 5, 2016 03:36 PM
TheValor
MEGAsquirt
5
Sep 1, 2016 10:06 PM
Gimpster
Meet and Greet
6
Aug 31, 2016 08:00 AM
TheV's
DIY Turbo Discussion
3
Aug 30, 2016 11:14 AM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 09:32 PM.