I ended up building an MS3X for my 1996 NA with the trubo kitty guide about a month ago and since then have installed a turbo setup in the car. The car is running great so far with help from the tunerstudio autotune feature. I am having an issue with launch control being active (when enabled) all the time regardless if the clutch is pressed in or not. I wanted to know if anybody else has dealt with this issue before and could give me some advice.

 

Check the switch on the pedal

 

I am quite sure there has been at least one thread with the exact same title in here the last 6 months.

 

figured it out

ended up just always being active because of the neutral safety switch when stopped, and didn't have the feature turned on to disable it after a certain speed

 

Hey Shipsterns, what are your settings? I have the same issue on mine. I just disconnected the neutral safety switch on the trans and its still activated all the time.

 

What year is yours? I have heard some years have that issue. I just use the "launch in" pin on my car and everything works, I just don't have to push in the clutch to activate launch control when in neutral. tunerstudio shows that launch in is always active when stopped in neutral.