svbc

I found some time to work on my car today and I can't get it to work.

I opened tunerstudio and selected create new project. Clicked detect for the firmware and it just sits there searching forever. Nothing happens.

I used the portcheck v2b program that came on the disc and it says opened com3. And then lists what I believe is the firmware for my ecu.

I'm totally new to this and I don't know what is going on? Can somebody help me here?

bahurd

iTrader: (8)

<p>How-To: Setup TunerStudioMS</p>

svbc

In those instructions step 4b says if it can't find the ini file a dialog box will pop up. It's been searching for known devices for 10 minutes and nothing has popped up.

bahurd

iTrader: (8)

<p>&nbsp;</p><p></p><p>&nbsp;</p><p>Make sure Tunerstudio can talk to the ECU</p><p>Communications &gt; Settings &gt; Detect</p><p>Power has to be on also.</p><p>&nbsp;</p><p>&nbsp;</p>

svbc

Key is in on position. First two light on the ecu are on. I click on communications and it wont let me click settings.

bahurd

iTrader: (8)

I see you have another thread on what I guess is the same subject. Don't know why you needed to create a new project if you had communication with the ECU. <br /><br />I'll let Matt work it out with you. Good luck.

svbc

I figured it out and connected. Now I just need to get it to start. Thanks.