Hi all,

So, I've been running a stock 1.6 dialing in my tune on a speeduino with the goal of going turbo.

This weekend I decided my tune was close enough to throw in my flowforce 640cc ev14 and do the tidy up tune.

The problem is, even after moving my req. Fuel value from 12 to 4, my fuelling is way off.

Could someone throw up their tune running flowforces so I can try to figure out how far my fuelling is now off by.

If someone should alse post up the fuel pulsewidth these injectors like when cranking a hot engine, that'd be super helpful!

 

welcome to the real world, where the math is never correct.

https://www.miataturbo.net/megasquir...5/#post1274564

at least you can easilly verify your dead time by switching back and forth from 2 to 4 squirts per cycle

P.S. you should not post in the Megasquirt section..

 

Thanks lsd.

​​​​​​My problem was I bodged my voltage correction, with that fixed I'm now back on track.

I figured megasquirt users were more likely to have a tune with these injectors and offer a file I could make sense of in tunerstudio.