zammish

hi, I have a MSPNP in my 1.6 eunos and I want to run autotune on tunerstudio, I did some research and figured out I have to set up my a/f ratio targets.
I have a wideband installed and its working correctly with the MS, I have set my EGO sensor to Innovate lc-1 and the car runs fine, now I try to access my targets by clicking the 'more settings' tab and I can see 'AFR targets for VE table 1' but im unable to open it and the text is greyed out.
is there something ive missed?

konmo

iTrader: (2)

I'm using a MSPNP2 on 3.3.1 firmware. In tunerstudio I have a setting under the general settings tab called "Incorporate AFR Target". I have that set to include AFR Target. You might need to enable that to include your targets in the VE table.

zammish

hi thanks for the reply, I have version 2.6.12 of tuner studio, is there this setting on this version?

SchmoozerJoe

iTrader: (2)

Yes.
Basic/Load Settings
General Settings.

konmo

iTrader: (2)

^This

SchmoozerJoe

iTrader: (2)

Also, here's the link to the AFR tables.
Pretty sure you're looking for where to enter values into this table?



Which will bring you to this:


Good luck, and have fun!

zammish

I don't have anything like that.
I have this..

konmo

iTrader: (2)

Are you using a DIY MSPNP2? Thats what I'm using. Also mine is on firmware 3.3.1 which I think matters. You might see other options if your not on this.

aidandj

iTrader: (5)

Pretty sure he is on MSPNP1. I recently changed that setting on the other car I'm tuning right now, I can put up a screenshot later. I thought it was under the advanced menu though.

SchmoozerJoe

iTrader: (2)

All I can say is... poke around. Fairly certain you'll find an icon for AFR Table 1 just like you have the VE Table 1 in your screenshot.

And yes, looks like you're on a different firmware/etc. then I am, but as far as I know, you should be able to find the AFR Table icon in one of your lists.

DNMakinson

iTrader: (3)

Incorporating AFR is another, additional feature that is separate from setting the AFR table and having EGO and VEAL target those values.

konmo

iTrader: (2)

You can always just type in what your looking for into the search bar on the top right of tunerstudio. It works pretty good, just use key words.

zammish

notice here how AFR targets are greyed out...... I cant select it....


but if I go into the autotune side of it I can access the table, does this look correct? (I mean ok to adjust for autotune)

konmo

iTrader: (2)

Opening the AFR table through VEAL should do the same thing and take you to your AFR table.

zammish

yeah it takes me to the table thank you everybody!