New MS3x Build Problem - Cranks and Shows RPM But No Start
#1
New MS3x Build Problem - Cranks and Shows RPM But No Start
Hi guys, new here. Finished getting my MS3x put together for my 97 about 2 weeks ago and have been fighting with it ever since. Car is completely stock and runs great on the stock ECU.
When I go to start it, it shows RPM, Coil A is firing (nothing on B), and the injectors are firing (I'm pretty sure, definitely smells like fuel), but I only get an occasional hit or backfire. Composite logger shows Tooth Time and Sync but nothing on Trigger.
Megasquirt was built following the instructions on trubokitty.com and it is using the base tune from there too. I'll attach a few logs below and if anybody could give me some pointers that would be awesome.
Thanks, Maddox
When I go to start it, it shows RPM, Coil A is firing (nothing on B), and the injectors are firing (I'm pretty sure, definitely smells like fuel), but I only get an occasional hit or backfire. Composite logger shows Tooth Time and Sync but nothing on Trigger.
Megasquirt was built following the instructions on trubokitty.com and it is using the base tune from there too. I'll attach a few logs below and if anybody could give me some pointers that would be awesome.
Thanks, Maddox
Thread
Thread Starter
Forum
Replies
Last Post
Saldua
MEGAsquirt
16
06-26-2023 07:55 PM