Obligatory MS2PNP beginner issues
#22
Have you at least read through this for setting up your MSpnp2?
http://www.msextra.com/doc/pdf/Megas...ing_Up-3.4.pdf
There are 2 settings for fuel cut that could be what you're describing.
http://www.msextra.com/doc/pdf/Megas...ing_Up-3.4.pdf
There are 2 settings for fuel cut that could be what you're describing.
- Overrun Fuel Cut
- Decel Fuel Amount - Under AE settings
#26
Extremely rich and lean
Hello again I have another question about how my car is reacting to the Megasquirt. So I installed a turbo a week ago and replaced a head gasket. After this job the car began running worse. Off throttle the car does not cut fuel even with over-run fuel cut set to on and tps deceleration is set to 95. The car also leans out under light throttle as when pulling from a stop light. Does anybody know what these issues could be?
#29
If fuel cut isn't turning on anymore, you probably have a vacuum leak in your Intake Manifold, causing it to never go low enough KPA to trigger fuel cut.
You definitely need to get your turbo off and sort your tune out.
It took me months and months and months to get an understanding enough where I can happily tune my car good enough, then I put on my turbo and was able to understand what was going on and what needed changing and **** I still have ages to go before I would be able to get the most out of the engine and truly tune every thing perfectly.
You need to give us way more information, photos of your setup, engine bay, changes you make, logs, logs when your doing pulls, put markers on the log (hit spacebar when logging) and tell us what you were doing in the car when that happened.
Then maybe someone will come help you more.
You have to take it into your own hands and read EVERYTHING.
DiyAutoTune has some great articles on tuning stuff, theres a wordpress site called roadsterzoku which also has some good info on setting up a miata with megasquirt.
read read read, take off your turbo, get your car working and running WELL on N/A then come back.
Don't touch things like Accel enrichment till your Fuel VE Tables are good, one badly configured fuel amount, plus another badly configured fuel amount makes for a very badly fueled car and you won't know which one is wrong.
You definitely need to get your turbo off and sort your tune out.
It took me months and months and months to get an understanding enough where I can happily tune my car good enough, then I put on my turbo and was able to understand what was going on and what needed changing and **** I still have ages to go before I would be able to get the most out of the engine and truly tune every thing perfectly.
You need to give us way more information, photos of your setup, engine bay, changes you make, logs, logs when your doing pulls, put markers on the log (hit spacebar when logging) and tell us what you were doing in the car when that happened.
Then maybe someone will come help you more.
You have to take it into your own hands and read EVERYTHING.
DiyAutoTune has some great articles on tuning stuff, theres a wordpress site called roadsterzoku which also has some good info on setting up a miata with megasquirt.
read read read, take off your turbo, get your car working and running WELL on N/A then come back.
Don't touch things like Accel enrichment till your Fuel VE Tables are good, one badly configured fuel amount, plus another badly configured fuel amount makes for a very badly fueled car and you won't know which one is wrong.
Thread
Thread Starter
Forum
Replies
Last Post
texastboneking
MEGAsquirt
15
04-18-2014 08:40 PM