Odd issue after fan install
#1
Odd issue after fan install
Hey all,
I just reinstalled the oem fans to my mishimoto radiator. Install went fine and car was driving idling ok. Till I went into boost and noticed I was only boosting 2-3psi. Turns out I forgot to tighten a clamp and one of my couplers was popping off on my ic pipe.
Ok so I fixed that. Car was running fine again, holding boost, all feels normal. Drove to my gf's and about half way there my idle got all screwy, It's idling around 1500 rpms. I can't tell if I have another vacuum leak somewhere or maybe something got screwy on my tune. Vacuum was normal around -19inHg when i left.
Could you all take a peak at this log and just lemme know if you see anything out of place? I'm going to try and get under the car tomorrow and see if I missed anything. But I'm pretty sure I need to track down a vacuum leak I just need peace of mind it's not the ecu side of things.
TY
I just reinstalled the oem fans to my mishimoto radiator. Install went fine and car was driving idling ok. Till I went into boost and noticed I was only boosting 2-3psi. Turns out I forgot to tighten a clamp and one of my couplers was popping off on my ic pipe.
Ok so I fixed that. Car was running fine again, holding boost, all feels normal. Drove to my gf's and about half way there my idle got all screwy, It's idling around 1500 rpms. I can't tell if I have another vacuum leak somewhere or maybe something got screwy on my tune. Vacuum was normal around -19inHg when i left.
Could you all take a peak at this log and just lemme know if you see anything out of place? I'm going to try and get under the car tomorrow and see if I missed anything. But I'm pretty sure I need to track down a vacuum leak I just need peace of mind it's not the ecu side of things.
TY
#2
Ok so I was spraying around with some carb cleaner and the only place i got idle droop was behind the block. At first I thought maybe injector 4 but sprayed that and got no effect. I could only get idle to droop when I spray from the passenger side of the car to the back of the motor. I thought maybe it was my vacuum line for my boost gauge and ms so I replaced that. No change. Would the master brake cylinder vacuum line effect idle? The heater core hoses? I can't think of what else is back there that I could be hitting with the carb cleaner. Suggestions?
#4
Ok so I was spraying around with some carb cleaner and the only place i got idle droop was behind the block. At first I thought maybe injector 4 but sprayed that and got no effect. I could only get idle to droop when I spray from the passenger side of the car to the back of the motor. I thought maybe it was my vacuum line for my boost gauge and ms so I replaced that. No change. Would the master brake cylinder vacuum line effect idle? The heater core hoses? I can't think of what else is back there that I could be hitting with the carb cleaner. Suggestions?
#6
Ok I'm thrown for a loop here. I honestly don't know what I did. But the car is idling fine now. I changed to a tune from a fellow msm set up like mine is that has a different ecu firmware version. Started the car and it was running like crap. So I swapped back to my tune. Then I was running more idle valve tests and turned off the test and now the car is idling how it was before. Perfect 800-900rpms.
So I'm not 100% sure what i did really, I don't think I changed any settings. So I give up! The car is running fine now and I've drove it to work and back with no problems yet. I just don't know sometimes... Dumb luck?
So I'm not 100% sure what i did really, I don't think I changed any settings. So I give up! The car is running fine now and I've drove it to work and back with no problems yet. I just don't know sometimes... Dumb luck?
#7
Use the compare tune feature in TS to see which settings were different between the tunes. This may give you a clue as to why it was idling poorly.
edit: I looked over the first tune you posted and the idle valve frequency is set to only 30.5 Hz.
edit: I looked over the first tune you posted and the idle valve frequency is set to only 30.5 Hz.
Last edited by southernmx5; 09-11-2013 at 01:44 PM.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM