Strange stuff that always bothers me: fans stay on, Gamme Enrich
2 Attachment(s)
For some reason my fans come on at the correct temperature, but they don't turn off. I have the fan running off JS2 (boost control) and just like I said, it turns on but won't turn off unless I turn the AC button on flip the blower on/off twice. It also comes on when I crank the car, with the same on/off procedure to turn it off.
Then, gamma enrichment is always on at 116. I don't know why, can someone look at my MSQ and tell me what I'm overlooking? |
because race car
|
Originally Posted by jbrown7815
(Post 819979)
because race car
|
Can you post your user defined Cold start and Warm up enrichments?
|
4 Attachment(s)
Originally Posted by 2Bit
(Post 819987)
Can you post your user defined Cold start and Warm up enrichments?
I think I got all the project files and MSQ uploaded here. |
Originally Posted by hustler
(Post 819985)
-1 for ------ry.
|
What are your other enrichments at when gamma is at 116? Baro? others.
|
No i guess not. That's where i was going start with the t/s.
|
Yes that's the next step in the FI. What are the rest of the enrichments at while at 116?
|
Originally Posted by 240_to_miata
(Post 819992)
What are your other enrichments at when gamma is at 116? Baro? others.
|
Have a log of it running?
|
2 Attachment(s)
Originally Posted by Techsalvager
(Post 820064)
Have a log of it running?
|
its the stupid IAT correction.
GAIR |
Originally Posted by hustler
(Post 819996)
baro is 28 and 205. EGO is turned off.
the Gammae is your coolant (ait) corrected air density table. your fan problem is odd. looks like you want it to come on at 195° and off at 190°F but it never turns off? I wonder if there's a zener diode on that output holding the channel open or something. |
Originally Posted by Techsalvager
(Post 820093)
its the stupid IAT correction.
GAIR |
Originally Posted by Braineack
(Post 820138)
that would make the setup run like crap if baro was actually turned on.
Originally Posted by Braineack
(Post 820138)
your fan problem is odd. looks like you want it to come on at 195° and off at 190°F but it never turns off? I wonder if there's a zener diode on that output holding the channel open or something.
|
Originally Posted by hustler
(Post 820159)
EGO is turned off, not baro %
|
Originally Posted by Braineack
(Post 820162)
go to engine constants....baro is off.
|
I vote for a manual switch in cockpit for the fans. Other topics, I don't know, but you're cute.
|
Originally Posted by Bond
(Post 820181)
I vote for a manual switch in cockpit for the fans. Other topics, I don't know, but you're cute.
I'm aware, do you think I spend all this time in the gym to be ugly? |
All times are GMT -4. The time now is 11:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands