Swap issues 1.6 to 1.8 MS2
#1
Swap issues 1.6 to 1.8 MS2
Hello guys,
I have my stock Mazda Miata 1.6 85kW (1192). I've bought another Mazda Miata 1.8 turbo TD04 with MS2 DIYPNP (1994). I want to swap 1.8 engine with megasquirt into my 1.6 chassis and wiring harness.
I checked some wiring diagrams and it looks pretty similar. I will follow instructions from flyin miata guide 1.6 to 1.8 swap. So I will use 1.6 coils, 1.6 throttle body. BUT!
I'm not sure if I can use 1.6 wiring harness for 1.8 turbo engine and MS2 (which was running on 1.8 wiring harness before). I made some diagrams (green ones are the same, pink ones are different and purple are different to, but I will dont use them).
Any advice please? I don't want to burn my ECU =
1992 1.6 page 1/1
1994 1.8 page 1/2
1994 1.8 page 2/2
I have my stock Mazda Miata 1.6 85kW (1192). I've bought another Mazda Miata 1.8 turbo TD04 with MS2 DIYPNP (1994). I want to swap 1.8 engine with megasquirt into my 1.6 chassis and wiring harness.
I checked some wiring diagrams and it looks pretty similar. I will follow instructions from flyin miata guide 1.6 to 1.8 swap. So I will use 1.6 coils, 1.6 throttle body. BUT!
I'm not sure if I can use 1.6 wiring harness for 1.8 turbo engine and MS2 (which was running on 1.8 wiring harness before). I made some diagrams (green ones are the same, pink ones are different and purple are different to, but I will dont use them).
Any advice please? I don't want to burn my ECU =
1992 1.6 page 1/1
1994 1.8 page 1/2
1994 1.8 page 2/2
#2
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,184
Total Cats: 1,134
My advice would be keep the 1.8 throttle body. In order to use the 1.6, you need to add in a thick adapter, which makes routing intakes and charge pipes more difficult in an already tight space.
I would also advise you get the correct ECU for your wiring harness.
I would also advise you get the correct ECU for your wiring harness.
Thread
Thread Starter
Forum
Replies
Last Post
Mysticle31
MSPNP
1
02-28-2012 05:21 PM