TS afr problem
03-15-2011, 06:12 PM
#1
I'm Miserable!
Thread Starter
Join Date: Jun 2009
Location: albany, ga
Posts: 1,866
Total Cats: 0
TS afr problem
Has anyone experinced when tunerstudio shows 12.1 AFR only and sometimes shows different readings if you rev the engine fast in N
I know the ECU can see the correct AFR
because I had EGO correction on and that was working
tunerstudio was only showing 12.1
I did add the maf circuit
and I have wire connected from pin 1 on the map sensor to spr1 for output to my j&s
also I updated firmware to 3.1.0 from 3.0.3s
I know the ECU can see the correct AFR
because I had EGO correction on and that was working
tunerstudio was only showing 12.1
I did add the maf circuit
and I have wire connected from pin 1 on the map sensor to spr1 for output to my j&s
also I updated firmware to 3.1.0 from 3.0.3s
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
