deezums

iTrader: (3)

Hrm,

I'd export your fuel table then import the basemap and then bring your tables back in.

Spark A output pin under ignition options should be set to IGN1, not whatever yours is set at.

gr4v3r

I tried importing a basemap from diyautotune but still had errors and couldnt start. I will try and get out of work early tomorrow to do more tests. If you see anything else not right in my tune please let me know.

I know this is a dumb question but what does the firmware setup mean by "remove the ignition coil fuse" so I know what to unplug for next time. Which fuse is this?

deezums

iTrader: (3)

Unplug the coils or unplug the ignitor, that's all you do.

gr4v3r

Easy peasy, I think I'm going to try and reinstall the firmware tomorrow. It also said something along the lines of unplug the boot. Any idea about that one?

deezums

iTrader: (3)

boot jumper, never have to touch it once you have something at all on it.

Matt Cramer

Occasionally you may need it if there's something really scrambled in the tune.

gr4v3r

Is there anyone who can help me get the car started? Are there any vendors on the site that I could buy support from? I bought the MS 2nd hand so I dont know who built it.

ScottyP3821

iTrader: (2)

Thats awesome.


Seriously though there is a test mode in TS to check your coils. You will here them firing when you enable it. No need to pull anything.

ScottyP3821

iTrader: (2)

David where are you located? I feel bad that you are having all these issues.( I read your other thread about the "tuner")

Maybe one of us could help if we were local to you

gr4v3r

I am in PA, not far from philly. Nothing would make my life better than if someone could help me. I am $340 into a tuner and the car is now not running.....

ScottyP3821

iTrader: (2)

This is why I ****** hate tuners. Most of them make money off of tuning for flashes not standalone stuff. Im out in texas so I'm too far. Post up on the Miatasquirt Facebook page we have a lot of nice group members there that may also chime in to come help you out.

gr4v3r

joining now, thanks

deezums

iTrader: (3)

Mail the thing here if you have to, I'm sure you'll find local help though.

gr4v3r

Honestly I am thinking of just buying a new MSPNP just so I can get the support. Waiting for a response from diyautotune now though.

ScottyP3821

iTrader: (2)

Good luck with the support. By "support" they don't exactly mean over the phone engine tuning.

Reverant

iTrader: (10)

Post a picture of the ECU here so that we can see what you actually have.

gr4v3r

I cant find any markings or serial numbers. Also the shop that did the build put a sticker on it, not sure if that is covering something.

deezums

iTrader: (3)

That's a DIYPNP

gr4v3r

Would that use a different firmware/ini?

deezums

iTrader: (3)

Possibly, probably.