v3.0 fan control mod
#3
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,508
Total Cats: 4,080
https://www.miataturbo.net/forum/sho...18&postcount=3
basically, you ground the transistor (sorry i didn't label it).
then the middle leg goes to JS0 through a 1K ohm resistor.
then the third leg goes to D9 through it's own diode.
between the third leg and your diode, go to your harness output.
connect that output to the fan lead on your harness. (1R)
that's it, the parameters are under more setting > shift light / fan control
enter in the temps you want the fans to turn on and off.
make sure JS0 is set to fan control under Basic settings > codebase outputs
basically, you ground the transistor (sorry i didn't label it).
then the middle leg goes to JS0 through a 1K ohm resistor.
then the third leg goes to D9 through it's own diode.
between the third leg and your diode, go to your harness output.
connect that output to the fan lead on your harness. (1R)
that's it, the parameters are under more setting > shift light / fan control
enter in the temps you want the fans to turn on and off.
make sure JS0 is set to fan control under Basic settings > codebase outputs
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
russian
Miata parts for sale/trade
6
10-08-2015 03:01 PM