leboeuf

iTrader: (1)

The variable tps is just a variable resistor. You can use the existing wires as is. As for the specific bmw part that fits, either look around the forum, or I'll update the thread once I'm back at my puter

aidandj

iTrader: (5)

https://picasaweb.google.com/117376079491119648809

If you need pictures.

carbon

iTrader: (1)

**** yeah. YOU DA MAN NOW DAWG.

This was the pic I needed. I have that Vishnay TPS and couldn't find a diagram for it.

Rothko

Firstly, thanks Frank and Brain for creating this guide that has my car running very nicely on MS3X.

Secondly, I hope I'm not treading on toes by posting this - just trying to help the community as the community has helped me so much!

Linked below is a MS Word Doc (including pictures) that I copied from http://westfieldmx5.devocht.com/mega...ms3/90-97-ms3/ (12/11/2013)

Frank's Guide

nigelt

iTrader: (10)

Does anyone happen to have the 01-05 guide that used to live here: http://westfieldmx5.devocht.com/mega...ms3/99-05-ms3/

I would provide a satisfying high-5 to anyone who can share it with me!

p0staldude

The pictures that were in the article are still available on the picassa link above. There is a picture of the MS3 board that he build that show pretty well the mods that have to be done. There is also a diagram of the MS3/MS3X to Miata harness that you can build if you dont want to cut your harness.

The diyautotune link below also describe the changes that you have to do to the MS3 board

How to MegaSquirt your Mazda Miata

nigelt

iTrader: (10)

Thanks p0staldude, that is helpful, but not quite high-5 worthy.
I think I could assemble the diy ms3 with a good set of step-by-step instructions (in fact, I think it would be a lot of fun) but I'd worry that I would get myself in trouble without them.

WestfieldMX5

I'm sorry but all content is lost. I have not been able to find a backup. I don't even have a copy on paper anymore :(
Don't mind putting it back up if anyone has a copy / printout or anything of my site.

aidandj

iTrader: (5)

I have all of your 90-97 stuff. I'll link you it when I get on my computer. No idea about the 99-05.

nigelt

iTrader: (10)

That's tough!! I feel your pain having lost big chunks of work before. Thanks for your contribution to the community though!

Zaphod

Is none of those computer-geeks on here able to find that old stuff in some Google cache or such? Come on...

deezums

iTrader: (3)

I'm not an excellent geek, but according to google the webpage settings prevented the site from being saved on google servers. I don't know of any other cache service that ignores those requests, they are pretty universal.

shuiend

iTrader: (24)

archive.org also did not grab it all before it went down.

Ollie

I've saved at least 3 pages:
- 99-05 MS3
- 99-05 MS2
- ECU connectors
Hope this helps.

aidandj

iTrader: (5)

And here is the 90-97 MS3

That should cover most of what people need.

Frank I can host on my page too if you want a backup, let me know if you would be ok with that.

shuiend

iTrader: (24)

Don't know if this has been posted or not, but it appears to have some of the stuff from franks site.

Braineack

iTrader: (62)

all knowledge is in my head.

Rothko

Yep, that's from my Google Drive, I posted a link to it a few posts ago. It's pretty compete (90-94 only) but the photos are quite low resolution.

aidandj

iTrader: (5)

The pictures are still on franks picassa.

shuiend

iTrader: (24)

Ahh, I saw it on m.net and decided to cross post it, did not look at who posted it or anything.