utf-8BSU1HMDAyMzEtMjAxMDA3MzAtMTM1OS5qcGc.jpg?t=1280512840

key on, not running

 

conflict error on your outputs.

 

that might explain why the fan is on

 

use tuner studio. it will tell you what the conflict is on.

 

utf-8BSU1HMDAyMzItMjAxMDA3MzAtMTQyOS5qcGc.jpg?t=1280514680

 

i get this message
utf-8BSU1HMDAyMzMtMjAxMDA3MzAtMTQzNi5qcGc.jpg?t=1280515480

conflict with boost control pin

and this is in the ignition / tach settings

utf-8BSU1HMDAyMzQtMjAxMDA3MzAtMTQ0MC5qcGc.jpg?t=1280515480

 

so whatever you have boost control setup for is also setup for something else.

post the msq.

 

is that the ini file?

can I email it? it's too big to cut and paste

 

its in the msq....


who built the megasquirt?

 

I have no clue how to get there.
I downloaded the tune from diypnp.com

 

did you buy a diypnp?

please mare sure to give us as little details as possible in your next answer so this lasts all day.

 

it is a black box DIY. Ben built it. Said he loaded it with a tune for a 1.6 with 240cc injectors and test ran it on his wifes 91. I plugged it into my 90 and you can see what i'm getting

 

does this help?

7 Warnings:
Warning: Parameter in msq, but not valid for current firmware: No options found for Bit EcuParameter:flexport
Warning: Parameter in msq, but not valid for current firmware: No options found for Bit EcuParameter:rtbaroport
Warning: Parameter in msq, but not valid for current firmware: No options found for Bit EcuParameter:ego2port
Warning: Parameter in msq, but not valid for current firmware: No options found for Bit EcuParameter:tacho_opt3f
Warning: Parameter in msq, but not valid for current firmware: No options found for Bit EcuParameter:launch_opt_pins
Warning: Parameter in msq, but not valid for current firmware: No options found for Bit EcuParameter:N2Oopt_pins2
Warning: Parameter in msq, but not valid for current firmware: No options found for Bit EcuParameter:N2Oopt_pins

 

it runs, thanks for the help

 

What was the fix? I don't care, but people dealing with the issues in the future who are using the search feature might

 

this was the dumbest post of life

 

http://www.youtube.com/watch?v=DFG9dwolo3Q

 

You still haven't said "the problem was...... and the fix was............ "

 

Braineack nailed the problem, but it's still not fixed.



new problem.
The fan runs all the time from key on, but if I step on the brake it stops.

is this a wiring problem?
I'm using the factory harness with only a chage for the temp sensor.

 

print screen takes screenshots for future reference lol