ok so finnaly i got the DP back together.. and wanted to take a look at my logs to see if i can figure out my problem..

i got a used msPnP and i loaded the base map onto the ecu before i even had the DP problem.

here is my log from just a minute ago. im pretty sure im doing it wrong but i reved it in neutral and then drove down my drive way and back twice.(i dont have plates on the car so i cant go down the road.

hopefully someone here can tell me whats wrong

before i forget. i currently have just the turbo and the ms in the car. its non intercooled, running 5psi off the wastegate. my injectors,pump,water/meth, wideband, and FMIC are not installed yet.... i read the instructions a couple times so im gonna get it running right without the mods first then add them 1 by 1.

 

Install the wideband before you even think about tuning it. Then look at what people are running on here.

 

I like how its leaner in boost than idle, lol.

You need to adjust fuel for starters and if you don't know how to do that you should read the stickies here on tuning. Tuning the VE table is very simple once you know your targets.

 

I think you might doing this turbo build just a bit out of order...you might need to add an replacement engine "mod" if you don't think very carefully about what you are doing here...GL