Only if they don't go as a set. We're a ways away from even removing the tires, much less seperating the wheels. Emilio says the 4th gen nickel is very close, I'm hoping people will realize they could have a 15x9 225/45 r-comp setup that's nearly new for $1325 instead of $1500.

That's fine, I could take it with a tire if you decide to separate. Just LMK. If not then no biggie. I certainly don't need 3 of them.

If he happens to decide to sell that rollbar cover... I'm interested

Do you have the tail lights?

I have the driver side, and the passenger wiring harness for a nb1-nb2 rail light conversion.

Are you willing to separate the passenger sliders from the seat?

Not at this point.

Brakes, ducts, and rotors moved to another thread:

https://www.miataturbo.net/miata-par...s-ducts-84343/

I'll try to keep this thread for the stock parts.

I'll also get pictures up eventually of many things in many threads, and I'll make another thread for the two 15x9 nickel 6uls with practically new RC-1s. Soon.

Wait, two 6ULs? What happened to the third?

What third do you keep talking about??? Entire passenger side of the car car was scrapped except brakes.

:facepalm:

Reading comprehension fail. The first time I read your post I saw gen 3 and just read "3 15x9 6ul with maxxis... "

Hur dur. OK.

I could use the seatbelt bolt covers if you have them and the wiper bolt covers if the other member didn't grab them.

Any chance Mobius still has a 4-rib 80mm Rotrex pulley???? I'm guessing you guys are keeping all that...

Correct. Keeping all that.

Here's some pics of the current state of the car. Actually it's completely stripped now, but this was yesterday before I did that.

heater box with a good heater core...

https://www.miataturbo.net/attachmen...ine=1431700613

blower motor, dash

https://www.miataturbo.net/attachmen...ine=1431700613

This is the trunk molding and windshield molding, both removed perfectly intact. They're going in the trash asap, they're constantly in my way.

https://www.miataturbo.net/attachmen...ine=1431700613

Not really much for sale in this picture. The engine harness is not for sale, the chassis harness and battery harness were removed intact, and are for sale.

https://www.miataturbo.net/attachmen...ine=1431700613

Here we have the bose single din radio, non-ac cross over tube, and gauges.

https://www.miataturbo.net/attachmen...ine=1431700613

Lastly a bunch of interior plastic pieces. Nothing interesting, but if you need a piece, I have it. Below these plastic pieces is the glass window soft top in ok condition. Rain rail has a crack, but it worked otherwise. Latches not included.

https://www.miataturbo.net/attachmen...ine=1431700613

Will take non-ac crossover tube. If it fits an NA.

Also, brakes posted here:

https://www.miataturbo.net/miata-par...ow-pics-84343/

wheels posted here:

https://www.miataturbo.net/miata-par...7/#post1231629

They are the same, AFAIK. Let me know the next time you're up here.

Will be up on thursday for other things. I'll stop by for the abs sensor and crossover tube.

I'm interested in the tan center console.