05 MSM partout, 80k miles,Engine/clutch/Head, DW 1000cc, FmII&ARtech/Keegan head
 

Hello all,

Have some parts from my Mazda-speed Mx5, at 86,000 miles. Still working on the motor/transmission removal.
I'm located in Moorhead, MN. I can ship, cheapest option is typically greyhound or UPS. Free pickup, or buyer pays shipping, can't give stuff away for free, guys.

Micheal Keegan CNC Ported VVT Head, Brand new 0HRS -- $3,000.00
- Inquries please PM for details
-CNC port job, Supertech +1mm Valves, Double Springs, TI retainers, INTEGRAL Cam Shafts, flows 259.8cfm@.550 intake, 189.2cfm@.550 exhaust.
Cams are meant for street/track use, with good idle quality. Took a year to get, save yourself the wait.

ARTech/FMII Turbo System, no electronics. $2,900
-GT3071 turbo w/FM coolant lines and drain, custom -6 oil feed.
-FMII Silicon piping, intake, intake shroud, heat shield(modified to fit)
-Spearco 3" core intercooler (needs custom bracket made, Keeping mine)
-TurboSmart bov, Halman in-cab MBC, Speedhut boostgauge
-ARTech FM replacement manifold w/ceramic coat from BEGI, SGDP, 3"
from downpipe back, Vibrant Hi-Flow cat, Magnaflow 22" muffler. 2 O2
bungs.
-Any questions, photos, etc, ask. May include SK2 mani/tb free w/kit
-I am waiting on new studs for the turbo, so I may need 3-4 days to get them in. Other than that, it was removed a few days ago working, very nice setup.
Stock MSM PPF, should fit any car. $75
Skunk 2 Honda B18C2 Intake Manifold+Billet 68mm Throttle Body, with Miata TPS adapter harness $300
-This requires the runners cut and Miata flange welded on, as well as a custom IAC solution, such as a jeep unit.
Set of 4 DW 1000cc injectors. Ran for about 12k miles. Could use new seals before using. $300.00
ACT Streetlite Flywheel (13.5lbs) and ACT ZM2-XTSS clutch/pp. $450
Lightly used. Installed it and drove across state a few times since then. Around 14k miles
P/n on flywheel is 600290, clutch is 3000203, Note some heat marks on friction surface.

___SOLD____
Diff with axles, $650. SOLD
Driveshaft in good shape. U-joints seem good, but could easily replace them. $100 SOLDSOLD
MSM 6-speed transmission $700 SOLD
Skunk 2 Honda B18C2 Intake Manifold+Billet 68mm Throttle Body, with Miata TPS adapter harness $300
-This requires the runners cut and Miata flange welded on, as well as a custom IAC solution, such as a jeep unit.


Attached are some photos:
https://www.miataturbo.net/attachmen...ine=1401317455
https://www.miataturbo.net/attachmen...ine=1401317455
https://www.miataturbo.net/attachmen...ine=1401317455
https://www.miataturbo.net/attachmen...ine=1401317455
https://www.miataturbo.net/attachmen...ine=1401317455
https://www.miataturbo.net/attachmen...ine=1401317455
https://www.miataturbo.net/attachmen...ine=1401317455
https://www.miataturbo.net/attachmen...ine=1401316241
https://www.miataturbo.net/attachmen...ine=1401316241
https://www.miataturbo.net/attachmen...ine=1401316241
https://www.miataturbo.net/attachmen...ine=1401316241
https://www.miataturbo.net/attachmen...ine=1401316241
G][/URL]

https://www.miataturbo.net/attachmen...ine=1401250808
https://www.miataturbo.net/attachmen...ine=1401250808
http://img.photobucket.com/albums/v2...ps90c15cd6.jpg
Attachment 184889
Attachment 184890
Attachment 184891

$$ on diff, axles, and driveshaft to 53527?

Let me get an estimate. Do you have a Greyhound station nearby or do you want to go fedex/UPS?

Fedex/UPS is fine -- it's to a business address.

good morning bump.

You're sure those are DW 1000cc injectors, and not RX-8 injectors?

Most RX-8 injectors are yellow, and most DW injectors are black.

My DW1000's were yellow and looked exactly like those.

^ Same.

if he doesnt take that diff i wll =D

I think they can also be purple, can't they? Either way, I purchased them as DW 1000cc injectors. They are obviously original denso units reworked by DW, but still, 1000cc units.

I have one open offer on the diff/axles/driveshaft, waiting on that. If not, I'll go down the list of interested people I have so far.

I have more parts off the car, maybe tomorrow or the next day I'll photo, price and list them.

cost on shipping 6-speed to 06460? There is a greyhound station not far in New Haven, CT i'd be fine with UPS or greyhound whatever is cheaper.

Ok, I will check it out. I know I did a t56 recently for about $90. I think the Asin should be similar. I can greyhound as long as its under 100lbs.

Thanks.

P.S. I used to live in New London, Nice area up there.

Added the clutch. I pulled the motor and transmission today, more parts to follow on my list in the next few days.

Greyhound or UPS are almost identical. 91.7lbs, $100 even. Comes with ACT throwout bearing, shifter, New Mazda OEM output shaft seal at that price. I'll include all the sensors, and any bolts you'd need to install, just ask, as I don't know what your putting it on, so just let me know what would be needed. I think you need the metal spacer plate if you have a 5speed car, for instance.

P.S. Here's to one week and no Moorhead jokes. :beer:

Cleared pm box

Transmission is Sold. Everything else remains. ARtech Turbo kit, hydra, Head, and CNC ported head w/cams will be up this weekend.

I think I'd like to subscribe to your newsletter.

;) pmd cleared. Shipping stuff today, I'm out of town this weekend for vacation. Expect slow updates till Monday.

Torsen goods soooold.

My Garage is a mess! Trying to get through everything, hopefully I can get more up in the next few days.

https://www.miataturbo.net/attachmen...ine=1401250436