05 MSM drivetrain partout, 80k miles,Engine/clutch/trans/diff, DW 1000cc
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: May 2008
Location: Fargo, ND
Posts: 533
Total Cats: 3
05 MSM partout, 80k miles,Engine/clutch/Head, DW 1000cc, FmII&ARtech/Keegan head
Hello all,
Have some parts from my Mazda-speed Mx5, at 86,000 miles. Still working on the motor/transmission removal.
I'm located in Moorhead, MN. I can ship, cheapest option is typically greyhound or UPS. Free pickup, or buyer pays shipping, can't give stuff away for free, guys.
Micheal Keegan CNC Ported VVT Head, Brand new 0HRS -- $3,000.00
- Inquries please PM for details
-CNC port job, Supertech +1mm Valves, Double Springs, TI retainers, INTEGRAL Cam Shafts, flows 259.8cfm@.550 intake, 189.2cfm@.550 exhaust.
Cams are meant for street/track use, with good idle quality. Took a year to get, save yourself the wait.
ARTech/FMII Turbo System, no electronics. $2,900
-GT3071 turbo w/FM coolant lines and drain, custom -6 oil feed.
-FMII Silicon piping, intake, intake shroud, heat shield(modified to fit)
-Spearco 3" core intercooler (needs custom bracket made, Keeping mine)
-TurboSmart bov, Halman in-cab MBC, Speedhut boostgauge
-ARTech FM replacement manifold w/ceramic coat from BEGI, SGDP, 3"
from downpipe back, Vibrant Hi-Flow cat, Magnaflow 22" muffler. 2 O2
bungs.
-Any questions, photos, etc, ask. May include SK2 mani/tb free w/kit
-I am waiting on new studs for the turbo, so I may need 3-4 days to get them in. Other than that, it was removed a few days ago working, very nice setup.
Stock MSM PPF, should fit any car. $75
Skunk 2 Honda B18C2 Intake Manifold+Billet 68mm Throttle Body, with Miata TPS adapter harness $300
-This requires the runners cut and Miata flange welded on, as well as a custom IAC solution, such as a jeep unit.
Set of 4 DW 1000cc injectors. Ran for about 12k miles. Could use new seals before using. $300.00
ACT Streetlite Flywheel (13.5lbs) and ACT ZM2-XTSS clutch/pp. $450
Lightly used. Installed it and drove across state a few times since then. Around 14k miles
P/n on flywheel is 600290, clutch is 3000203, Note some heat marks on friction surface.
___SOLD____
Diff with axles, $650. SOLD
Driveshaft in good shape. U-joints seem good, but could easily replace them. $100 SOLDSOLD
MSM 6-speed transmission $700 SOLD
Skunk 2 Honda B18C2 Intake Manifold+Billet 68mm Throttle Body, with Miata TPS adapter harness $300
-This requires the runners cut and Miata flange welded on, as well as a custom IAC solution, such as a jeep unit.
Attached are some photos:
G][/URL]
Have some parts from my Mazda-speed Mx5, at 86,000 miles. Still working on the motor/transmission removal.
I'm located in Moorhead, MN. I can ship, cheapest option is typically greyhound or UPS. Free pickup, or buyer pays shipping, can't give stuff away for free, guys.
Micheal Keegan CNC Ported VVT Head, Brand new 0HRS -- $3,000.00
- Inquries please PM for details
-CNC port job, Supertech +1mm Valves, Double Springs, TI retainers, INTEGRAL Cam Shafts, flows 259.8cfm@.550 intake, 189.2cfm@.550 exhaust.
Cams are meant for street/track use, with good idle quality. Took a year to get, save yourself the wait.
ARTech/FMII Turbo System, no electronics. $2,900
-GT3071 turbo w/FM coolant lines and drain, custom -6 oil feed.
-FMII Silicon piping, intake, intake shroud, heat shield(modified to fit)
-Spearco 3" core intercooler (needs custom bracket made, Keeping mine)
-TurboSmart bov, Halman in-cab MBC, Speedhut boostgauge
-ARTech FM replacement manifold w/ceramic coat from BEGI, SGDP, 3"
from downpipe back, Vibrant Hi-Flow cat, Magnaflow 22" muffler. 2 O2
bungs.
-Any questions, photos, etc, ask. May include SK2 mani/tb free w/kit
-I am waiting on new studs for the turbo, so I may need 3-4 days to get them in. Other than that, it was removed a few days ago working, very nice setup.
Stock MSM PPF, should fit any car. $75
Skunk 2 Honda B18C2 Intake Manifold+Billet 68mm Throttle Body, with Miata TPS adapter harness $300
-This requires the runners cut and Miata flange welded on, as well as a custom IAC solution, such as a jeep unit.
Set of 4 DW 1000cc injectors. Ran for about 12k miles. Could use new seals before using. $300.00
ACT Streetlite Flywheel (13.5lbs) and ACT ZM2-XTSS clutch/pp. $450
Lightly used. Installed it and drove across state a few times since then. Around 14k miles
P/n on flywheel is 600290, clutch is 3000203, Note some heat marks on friction surface.
___SOLD____
Diff with axles, $650. SOLD
Driveshaft in good shape. U-joints seem good, but could easily replace them. $100 SOLDSOLD
MSM 6-speed transmission $700 SOLD
Skunk 2 Honda B18C2 Intake Manifold+Billet 68mm Throttle Body, with Miata TPS adapter harness $300
-This requires the runners cut and Miata flange welded on, as well as a custom IAC solution, such as a jeep unit.
Attached are some photos:
G][/URL]
Last edited by chance91; 05-28-2014 at 06:52 PM. Reason: Added more parts 5/28
#10
Senior Member
Thread Starter
iTrader: (3)
Join Date: May 2008
Location: Fargo, ND
Posts: 533
Total Cats: 3
I have one open offer on the diff/axles/driveshaft, waiting on that. If not, I'll go down the list of interested people I have so far.
I have more parts off the car, maybe tomorrow or the next day I'll photo, price and list them.
#12
Senior Member
Thread Starter
iTrader: (3)
Join Date: May 2008
Location: Fargo, ND
Posts: 533
Total Cats: 3
Thanks.
P.S. I used to live in New London, Nice area up there.
#14
Senior Member
Thread Starter
iTrader: (3)
Join Date: May 2008
Location: Fargo, ND
Posts: 533
Total Cats: 3
P.S. Here's to one week and no Moorhead jokes.
Last edited by chance91; 05-23-2014 at 12:41 AM.