When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Artech Ramhorn Top Mount - Mixing manifold - Belt tensioner - EFR B1 turbine housing
SOLD SOLD SOLD
Hello, I am seeing if there's any interest in the Artech manifold that I've been using. I'm about to change setups, and would like to recoup some of the costs since I'm down the rabbit hole and can't really turn back now. This was used with both an EFR6258 and an EFR6758 but should fit other T25 platforms as well. I am retaining the downpipe, so you will need to fabricate one. Don't worry, it can be done without interference to the shelf in the engine bay. Included will also be an MSM mixing manifold, modified by Abe/Artech, and respective heater core return tube.
This has served me real well, and maybe it will do the same for you.
Artech Ramhorn T25 top mount manifold with egt bung
Modified MSM Mixing manifold
MSM heater core return Price $650
If you already have or want to buy a supercore to save on an EFR setup, I have the following available:
Borg Warner EFR B1 0.64A/R T25 Turbing Housing (+$200)
Borg Warner High Boost Canister (+$30) Turbosmart Komact Shortie BOV (SOLD)
OEM A/C belt tensioner (+$150) Buy everything together I'll knock off $75
I may also have other things I can throw in for fittings and lines More pics to follow later today.
When I first got it coated:
Shows the modified mixing manifold:
Manifold and the Turbine housing available
Poorly sized photo of belt tensioner
Last edited by psyber_0ptix; 08-06-2019 at 01:54 PM.
man that is a funky manifold. no interference with the AC/power steering or water outlet though I bet
I ran it with A/C for a while, and the water outlet was modified but is included with whomever buys this. The Hawley mixing manifold replacement should also work here. I didn't have P/S but was using the tensioner, also available. My car never came with power steering so I cannot answer to that.
Adding to what ryansmoneypit stated, this was the top quality manifold when there were only a handful of EFR's being run on miatas. It makes gobs of torque, and has treated many well. Abe/Artech has a fantastic reputation for quality, and did all the welding for this build from oil return bung, water lines and full turbo back exhausts with two different mufflers at one point: one large and another smaller. This is still the best exhaust I have seen on a miata, and not just because i'm bias.
Got it back from machine shop after being hit tanked. Cleaned up but could go for a recoat or wrap since it's been so long. No cracks present despite its years of use. Should work perfectly
03-05-2019, 11:52 AM
Artech Ramhorn Top Mount - Mixing manifold - Belt tensioner - EFR B1 turbine housing
0
