College Students Need Money!! Good Stuff For Sale
#1
Junior Member
Thread Starter
iTrader: (4)
Join Date: Sep 2006
Location: Bakersfield, Ca
Posts: 154
Total Cats: 0
College Students Need Money!! Good Stuff For Sale
Hard Top - Paint is very nice, excuse some of the dust its been sitting for 3 weeks.
Going back to the soft top for my spirited moutian driving. I like the top going up and down! As you can see there is a ding on the hard top. Im guessing the shipping company did it. Anyways $875 obo.
Jackson Racing SuperCharger w/ big boost kit & J&S safegaurd+kock sensor
(94-97 miatas)
The kit is complete and comes with..
-M45 supercharger (great shape)
-Big Boost Overlay pulley (good for 7.5-8.5 psi)
-J&S ignition retarding unit w/ kock sensor (name explains it all)
-JR FPR (6:1)
-1 new belt (for 1.8L w/ p/s only)
-1 used belt (for 1.8L w/ p/s & a/c
-Crossover Tube
-dummy throttle body
-Mounting Hardware (clamps, couplers..ect)
-U shaped inlet tube with air filter
This kit should make any miata fun to drive and $/hp isnt bad. I bought this kit with intention of puting it on my 1.8L when I got it swapped in. 1.8L has been a no go so now its for sale. I got a pretty good deal on it so I'll pass in on to you guys. $1375 shipped
BEGi boost gauge kit with mounting pod
$55 shipped
305cc supra injectors
$60 shipped
I also have a 97 1.8L that I was going to swap into my car. Bought it from a local miata recycler. Looks to have had timing belt and water pump replaced. Engine comes fully dressed. Leak down #'s were 4% 5% 6% 6%
$550 w. Flyin Miatas 1.8L swap kit. Can also make a deal if bought with the supercharger.
*All parts are located in Southern California area. PM me with any questions!
Going back to the soft top for my spirited moutian driving. I like the top going up and down! As you can see there is a ding on the hard top. Im guessing the shipping company did it. Anyways $875 obo.
Jackson Racing SuperCharger w/ big boost kit & J&S safegaurd+kock sensor
(94-97 miatas)
The kit is complete and comes with..
-M45 supercharger (great shape)
-Big Boost Overlay pulley (good for 7.5-8.5 psi)
-J&S ignition retarding unit w/ kock sensor (name explains it all)
-JR FPR (6:1)
-1 new belt (for 1.8L w/ p/s only)
-1 used belt (for 1.8L w/ p/s & a/c
-Crossover Tube
-dummy throttle body
-Mounting Hardware (clamps, couplers..ect)
-U shaped inlet tube with air filter
This kit should make any miata fun to drive and $/hp isnt bad. I bought this kit with intention of puting it on my 1.8L when I got it swapped in. 1.8L has been a no go so now its for sale. I got a pretty good deal on it so I'll pass in on to you guys. $1375 shipped
BEGi boost gauge kit with mounting pod
$55 shipped
305cc supra injectors
$60 shipped
I also have a 97 1.8L that I was going to swap into my car. Bought it from a local miata recycler. Looks to have had timing belt and water pump replaced. Engine comes fully dressed. Leak down #'s were 4% 5% 6% 6%
$550 w. Flyin Miatas 1.8L swap kit. Can also make a deal if bought with the supercharger.
*All parts are located in Southern California area. PM me with any questions!
#10
Junior Member
Thread Starter
iTrader: (4)
Join Date: Sep 2006
Location: Bakersfield, Ca
Posts: 154
Total Cats: 0
After reviewing my prices. They might have seemed a little high.
Prices have been updated!
-HardTop - $850
-JRSC Kit w/ BBK+J&S w/kocksensor -$1225+shipping
-BEGi boost gauge kit with mounting pod -$45 shipped
-6 305cc supra injectors -$50 shipped
-1.8L w/ FM swap kit ($150 bucks new) -$450
:NOTE: I also added more parts in another thread. I only made the thread because it wouldnt let me edit my post here.
Prices have been updated!
-HardTop - $850
-JRSC Kit w/ BBK+J&S w/kocksensor -$1225+shipping
-BEGi boost gauge kit with mounting pod -$45 shipped
-6 305cc supra injectors -$50 shipped
-1.8L w/ FM swap kit ($150 bucks new) -$450
:NOTE: I also added more parts in another thread. I only made the thread because it wouldnt let me edit my post here.
#17
Junior Member
Thread Starter
iTrader: (4)
Join Date: Sep 2006
Location: Bakersfield, Ca
Posts: 154
Total Cats: 0
Supercharger has been listed on ebay.
http://cgi.ebay.com/ebaymotors/94-97...em160192130919
If anyone wants to buy it on the forum I will close the ebay bid. Im taking a bunch off the origional asking price.
New price is $1100 plus shipping for...
-M45 supercharger
-Big Boost Overlay pulley (good for 7.5-8.5 psi)
-J&S ignition retarding unit w/ kock sensor (name explains it all)
-JR FPR (6:1)
-1 new belt (for 1.8L w/ p/s only)
-1 used belt (for 1.8L w/ p/s & a/c
-Crossover Tube
-dummy throttle body
-Mounting Hardware (clamps, couplers..ect)
-U shaped inlet tube with air filter
1.8L has also been reduced to $350 w/ flyin miata brand new swap kit.
Package deal! 1.8L swap+jrsc for $1400.
thanks guys!
http://cgi.ebay.com/ebaymotors/94-97...em160192130919
If anyone wants to buy it on the forum I will close the ebay bid. Im taking a bunch off the origional asking price.
New price is $1100 plus shipping for...
-M45 supercharger
-Big Boost Overlay pulley (good for 7.5-8.5 psi)
-J&S ignition retarding unit w/ kock sensor (name explains it all)
-JR FPR (6:1)
-1 new belt (for 1.8L w/ p/s only)
-1 used belt (for 1.8L w/ p/s & a/c
-Crossover Tube
-dummy throttle body
-Mounting Hardware (clamps, couplers..ect)
-U shaped inlet tube with air filter
1.8L has also been reduced to $350 w/ flyin miata brand new swap kit.
Package deal! 1.8L swap+jrsc for $1400.
thanks guys!
#19
Junior Member
Thread Starter
iTrader: (4)
Join Date: Sep 2006
Location: Bakersfield, Ca
Posts: 154
Total Cats: 0
You will have to run it with out the crank overlay pulley for it to be carb eo. As for the sticker itself. Since I bought it from a person that used it out of california..you will have to call JR themselfs and get the number.
and no you shouldnt have to buy anything to run this kit. I have checked and rechecked and I come up with all the parts to complete the kit.
and no you shouldnt have to buy anything to run this kit. I have checked and rechecked and I come up with all the parts to complete the kit.
#20
You will have to run it with out the crank overlay pulley for it to be carb eo. As for the sticker itself. Since I bought it from a person that used it out of california..you will have to call JR themselfs and get the number.
and no you shouldnt have to buy anything to run this kit. I have checked and rechecked and I come up with all the parts to complete the kit.
and no you shouldnt have to buy anything to run this kit. I have checked and rechecked and I come up with all the parts to complete the kit.