DIY Autotune Megasquirt Plug and Play for 90-93 Miata $400
#1
DIY Autotune Megasquirt Plug and Play for 90-93 Miata $400
This is a first gen unit. It has fewer than 100 miles on it, seriously. It comes with the ECU and a new intake air temperature sensor.
As the name implies, installation is pretty easy. You plug it in just like the factory ECU, and then you run a vacuum line to the ECU from the intake manifold (it uses a built-in MAP sensor), and install an intake air temperature sensor (included).
The unit is kind of like this one: MegaSquirtPNP MM9093 Gen 2 for the 1990-93 Mazda Miata, manual tranny DIYAutoTune.com, only that is an example of the newer generation. The one I have for sale is essentially, only it's the older version. It has a tune on it for a boosted 1.6. I don't have the serial data cable (which you can get at Fry's) or the CD, but it's my understanding that the software is free on the interwebz. Other than that, I don't really know a lot about this. I bought this ECU and installed it only to find that my tuner doesn't tune Megasquirt. So I got an AEM EMS and the MS has sat on the shelf for a while.
$400.
As the name implies, installation is pretty easy. You plug it in just like the factory ECU, and then you run a vacuum line to the ECU from the intake manifold (it uses a built-in MAP sensor), and install an intake air temperature sensor (included).
The unit is kind of like this one: MegaSquirtPNP MM9093 Gen 2 for the 1990-93 Mazda Miata, manual tranny DIYAutoTune.com, only that is an example of the newer generation. The one I have for sale is essentially, only it's the older version. It has a tune on it for a boosted 1.6. I don't have the serial data cable (which you can get at Fry's) or the CD, but it's my understanding that the software is free on the interwebz. Other than that, I don't really know a lot about this. I bought this ECU and installed it only to find that my tuner doesn't tune Megasquirt. So I got an AEM EMS and the MS has sat on the shelf for a while.
$400.
#2
Any idea which processor and board version? Care to post a photo so we can help verify?
Since this forum had that 15 post rule on PMs, I can't PM you so you can email me at mistamike17 a.t. drivelex.com.
Since this forum had that 15 post rule on PMs, I can't PM you so you can email me at mistamike17 a.t. drivelex.com.
Last edited by Mistamike17; 04-22-2014 at 12:09 AM.
#3
Good idea. I'll snap some pics tomorrow after work.
#7
I am also interested in the megasquirt. If it falls through with the other people could you shoot me an email at inspecta.recta at gmail
#8
#9
i want lmk if you dont sell it or know anyone else selling similar thanks
#10
This is still on the market.
#11
I'm interested if this is still for sale, can't pm yet shoot me a email @ badpanda07@gmail dot com
#12
I'm interested as well. Call/txt me @ 9194214222 if you still have it. Payment via verified Paypal email: brunellej at gmail.com
Last edited by racoonfrenzy; 05-18-2014 at 11:17 PM.
#14
This is a first gen unit. It has fewer than 100 miles on it, seriously. It comes with the ECU and a new intake air temperature sensor.
As the name implies, installation is pretty easy. You plug it in just like the factory ECU, and then you run a vacuum line to the ECU from the intake manifold (it uses a built-in MAP sensor), and install an intake air temperature sensor (included).
The unit is kind of like this one: MegaSquirtPNP MM9093 Gen 2 for the 1990-93 Mazda Miata, manual tranny DIYAutoTune.com, only that is an example of the newer generation. The one I have for sale is essentially, only it's the older version. It has a tune on it for a boosted 1.6. I don't have the serial data cable (which you can get at Fry's) or the CD, but it's my understanding that the software is free on the interwebz. Other than that, I don't really know a lot about this. I bought this ECU and installed it only to find that my tuner doesn't tune Megasquirt. So I got an AEM EMS and the MS has sat on the shelf for a while.
$400.
As the name implies, installation is pretty easy. You plug it in just like the factory ECU, and then you run a vacuum line to the ECU from the intake manifold (it uses a built-in MAP sensor), and install an intake air temperature sensor (included).
The unit is kind of like this one: MegaSquirtPNP MM9093 Gen 2 for the 1990-93 Mazda Miata, manual tranny DIYAutoTune.com, only that is an example of the newer generation. The one I have for sale is essentially, only it's the older version. It has a tune on it for a boosted 1.6. I don't have the serial data cable (which you can get at Fry's) or the CD, but it's my understanding that the software is free on the interwebz. Other than that, I don't really know a lot about this. I bought this ECU and installed it only to find that my tuner doesn't tune Megasquirt. So I got an AEM EMS and the MS has sat on the shelf for a while.
$400.
#15
I have a sale pending. I will let you guys know if it doesn't materialize.
#16
That sale fell through. I've gotten a ton of PMs. I'll work backwards through those messages.
#17
if possible can you email me hvr_32_sml@yahoo.com i can't use pm because i am a new member. i will buy
#18
This item has been sold. Thanks for all of the interest.
Thread
Thread Starter
Forum
Replies
Last Post