F/S PA: Fresh Rebuilt FE3 DOHC, Turbo stuff, Manifolds and More!!!
#23
depends on what trans you want to use...
if you want to use an rx7 trans...
a trans and make a crossmember and a modified driveshaft (i have a turbo slip yoke for an rx7 trans I'll give you if you wanna buy the stuff)
adapter plate to mount the rx7 trans to the fe3 (or a hybrid trans like the one im putting together)
mod the oil pan (notch the front to clear the subframe)
mod the oil pickup
make some motor mounts
wire in a megasquirt
odds and ends coolant hoses and whatnot.
you have to know what you're doing, or like fab work to enjoy this type of swap.
if you use a mazda b2200 truck bell housing, you can put that on the stock miata trans IIRC, but its not as strong as a turbo rx7 trans by any means.
heres one thats almost done!
https://www.miataturbo.net/build-threads-57/build-thread-fe3-rx7-tii-efr-6258-ms3-58140/
if you want to use an rx7 trans...
a trans and make a crossmember and a modified driveshaft (i have a turbo slip yoke for an rx7 trans I'll give you if you wanna buy the stuff)
adapter plate to mount the rx7 trans to the fe3 (or a hybrid trans like the one im putting together)
mod the oil pan (notch the front to clear the subframe)
mod the oil pickup
make some motor mounts
wire in a megasquirt
odds and ends coolant hoses and whatnot.
you have to know what you're doing, or like fab work to enjoy this type of swap.
if you use a mazda b2200 truck bell housing, you can put that on the stock miata trans IIRC, but its not as strong as a turbo rx7 trans by any means.
heres one thats almost done!
https://www.miataturbo.net/build-threads-57/build-thread-fe3-rx7-tii-efr-6258-ms3-58140/
#25
******UPDATED PARTS AND PRICES******
-Mazda/Kia FE3 DOHC Engine 0 Miles $500
-Fresh Rebuild by Professional Mechanic
-ALL NEW, Bearings (rod and main), KIA factory oil pump, Water Pump, Timing belt and pulleys
-Freshly Honed with New Rings
-all new Seals
-ARP head studs
-COMETIC copper Head gasket
-Re-Lapped valves
-Stock internals good for 450hp
-Kia Sportage Coil on plug Setup
-Perfect for Miata Swap, or FWD Ford Probe MX6 GT SWAP.
-Over $1000 in the rebuild
-Comes with KIA Sportage Flywheel and re-worked engine wiring harness
-SPEC Stage 3 clutch for Kia FE3 flywheel $225
-6 puck sprung disc good for 400 ftlbs of torque
-Custom built with splines to bolt up to MX6 Probe GT turbo Trans OR Mazda RX7 Trans
-Brand New (bolted to Flywheel)
-Comes with Pilot and throw out bearings
-Cost me $365
-JGS precision Mazda FE3 Turbo Manifold $200
-Log style Mild steel
-Creamic painted with Heat Wrap
-for internally gated turbos
-Never Used
-set up exactly like the maita 1.6 manifold they make...fits, works,
-GSP T430 Turbo $200
-T3 Flange
-Brand New
-Good for 420HP and 25psi
-Internal Wastegate
-Comes with 2.5 v-clamp outlet and flange with flare to 3inch for downpipe
-Kia/Mazda FE3 Hybrid intake manifold. $135 SHIPPED
-uses kia flange and runners w/ Accel injector bungs to use normal fuel injectors
-4inch Half round Aluminum Extrusion plentum
-CNC'd end cap threaded for 3 vacuum ports
-CNC'd Throttle Body Flange for Mustang Throttle body
-Comes with GT40 65mm TB and IAC
-Everything is fitted/but not welded...needs to be TIG welded together
-4inch Thick Front Mount Intercooler $100
-Brand New
-3inch inlets
-22x11x4 core
-4 Delphi 780cc injectors $200
-Used for one season in a Drift car
-Mazda/Kia FE3 DOHC Engine 0 Miles $500
-Fresh Rebuild by Professional Mechanic
-ALL NEW, Bearings (rod and main), KIA factory oil pump, Water Pump, Timing belt and pulleys
-Freshly Honed with New Rings
-all new Seals
-ARP head studs
-COMETIC copper Head gasket
-Re-Lapped valves
-Stock internals good for 450hp
-Kia Sportage Coil on plug Setup
-Perfect for Miata Swap, or FWD Ford Probe MX6 GT SWAP.
-Over $1000 in the rebuild
-Comes with KIA Sportage Flywheel and re-worked engine wiring harness
-SPEC Stage 3 clutch for Kia FE3 flywheel $225
-6 puck sprung disc good for 400 ftlbs of torque
-Custom built with splines to bolt up to MX6 Probe GT turbo Trans OR Mazda RX7 Trans
-Brand New (bolted to Flywheel)
-Comes with Pilot and throw out bearings
-Cost me $365
-JGS precision Mazda FE3 Turbo Manifold $200
-Log style Mild steel
-Creamic painted with Heat Wrap
-for internally gated turbos
-Never Used
-set up exactly like the maita 1.6 manifold they make...fits, works,
-GSP T430 Turbo $200
-T3 Flange
-Brand New
-Good for 420HP and 25psi
-Internal Wastegate
-Comes with 2.5 v-clamp outlet and flange with flare to 3inch for downpipe
-Kia/Mazda FE3 Hybrid intake manifold. $135 SHIPPED
-uses kia flange and runners w/ Accel injector bungs to use normal fuel injectors
-4inch Half round Aluminum Extrusion plentum
-CNC'd end cap threaded for 3 vacuum ports
-CNC'd Throttle Body Flange for Mustang Throttle body
-Comes with GT40 65mm TB and IAC
-Everything is fitted/but not welded...needs to be TIG welded together
-4inch Thick Front Mount Intercooler $100
-Brand New
-3inch inlets
-22x11x4 core
-4 Delphi 780cc injectors $200
-Used for one season in a Drift car
#30
Intake manifold sold to a probe guy, Intercooler sold as well
******UPDATED PARTS AND PRICES******
-SPEC Stage 3 clutch for Kia FE3 flywheel $225
-6 puck sprung disc good for 400 ftlbs of torque
-Custom built with splines to bolt up to MX6 Probe GT turbo Trans OR Mazda RX7 Trans
-Brand New (bolted to Flywheel)
-Comes with Pilot and throw out bearings
-Cost me $365
-JGS precision Mazda FE3 Turbo Manifold $200
-Log style Mild steel
-Creamic painted with Heat Wrap
-for internally gated turbos
-Never Used
-set up exactly like the maita 1.6 manifold they make...fits, works,
-GSP T430 Turbo $200
-T3 Flange
-Brand New
-Good for 420HP and 25psi
-Internal Wastegate
-Comes with 2.5 v-clamp outlet and flange with flare to 3inch for downpipe
-4 Delphi 780cc injectors $200
-Used for one season in a Drift car
**NEW ITEM!**
-RX7/BONGO Hybrid Transmission
-Bongo van Bell housing bolts directly to FE3 motor.
-Bongo van Input shaft (same splines as turbo RX7)
-Bongo Van 1st-4th gears. Same ratio as S3 (1st gen) NA 13b rx7's
--Steeper close gears 1st-3rd (4th is standard 1:1)
-S4 Turbo RX7 5th and Reverse gears for great cruising
-S4 turbo output shaf and speedo gear
-S4 Tailshaft housing (accepts flat mount)
-Comes with stock shifter
-as for price.... this is kind of a rare piece i am beginning to find out from the plethera of PM's im getting on different forums... I've been Offered $500 a bunch of times, but i'd have to ship it... I hate shipping stuff. If you beat $500 and want to pick it up, 1st $$ in my hand, or in my paypal account gets it... i need to buy new wheels for my Subaru.... BUT if the price is right (meaning it'd pay for my wheels) i'd ship it.
***if you buy the trans, I'll sell you the clutch with it for $175 as a package deal!***
Started as this......
BUILDING....
DONE.
******UPDATED PARTS AND PRICES******
-SPEC Stage 3 clutch for Kia FE3 flywheel $225
-6 puck sprung disc good for 400 ftlbs of torque
-Custom built with splines to bolt up to MX6 Probe GT turbo Trans OR Mazda RX7 Trans
-Brand New (bolted to Flywheel)
-Comes with Pilot and throw out bearings
-Cost me $365
-JGS precision Mazda FE3 Turbo Manifold $200
-Log style Mild steel
-Creamic painted with Heat Wrap
-for internally gated turbos
-Never Used
-set up exactly like the maita 1.6 manifold they make...fits, works,
-GSP T430 Turbo $200
-T3 Flange
-Brand New
-Good for 420HP and 25psi
-Internal Wastegate
-Comes with 2.5 v-clamp outlet and flange with flare to 3inch for downpipe
-4 Delphi 780cc injectors $200
-Used for one season in a Drift car
**NEW ITEM!**
-RX7/BONGO Hybrid Transmission
-Bongo van Bell housing bolts directly to FE3 motor.
-Bongo van Input shaft (same splines as turbo RX7)
-Bongo Van 1st-4th gears. Same ratio as S3 (1st gen) NA 13b rx7's
--Steeper close gears 1st-3rd (4th is standard 1:1)
-S4 Turbo RX7 5th and Reverse gears for great cruising
-S4 turbo output shaf and speedo gear
-S4 Tailshaft housing (accepts flat mount)
-Comes with stock shifter
-as for price.... this is kind of a rare piece i am beginning to find out from the plethera of PM's im getting on different forums... I've been Offered $500 a bunch of times, but i'd have to ship it... I hate shipping stuff. If you beat $500 and want to pick it up, 1st $$ in my hand, or in my paypal account gets it... i need to buy new wheels for my Subaru.... BUT if the price is right (meaning it'd pay for my wheels) i'd ship it.
***if you buy the trans, I'll sell you the clutch with it for $175 as a package deal!***
Started as this......
BUILDING....
DONE.
#37
******UPDATED PARTS AND PRICES******
-SPEC Stage 3 clutch for Kia FE3 flywheel $175
-6 puck sprung disc good for 400 ftlbs of torque
-Custom built with splines to bolt up to MX6 Probe GT turbo Trans OR Mazda RX7 Trans
-Brand New (bolted to Flywheel)
-Comes with Pilot and throw out bearings
-This thing Cost me $365... thats like $200 off!!
-JGS precision Mazda FE3 Turbo Manifold $150
-Log style Mild steel
-Creamic painted with Heat Wrap
-for internally gated turbos
-Never Used
-set up exactly like the maita 1.6 manifold they make...fits, works,
-I have over $250 into the manifold, not including labor for fabrication...a steal!
-4 Delphi 780cc injectors $200 obo SHIPPED ANYWHERE IN THE USA.
-Used for one season in a Drift car
-SPEC Stage 3 clutch for Kia FE3 flywheel $175
-6 puck sprung disc good for 400 ftlbs of torque
-Custom built with splines to bolt up to MX6 Probe GT turbo Trans OR Mazda RX7 Trans
-Brand New (bolted to Flywheel)
-Comes with Pilot and throw out bearings
-This thing Cost me $365... thats like $200 off!!
-JGS precision Mazda FE3 Turbo Manifold $150
-Log style Mild steel
-Creamic painted with Heat Wrap
-for internally gated turbos
-Never Used
-set up exactly like the maita 1.6 manifold they make...fits, works,
-I have over $250 into the manifold, not including labor for fabrication...a steal!
-4 Delphi 780cc injectors $200 obo SHIPPED ANYWHERE IN THE USA.
-Used for one season in a Drift car
#38
Aborting the Project due to Lack of funds, and time... I need to get another car asap... all extra money has been going into this car, and i need to put it into a good daily Driver.. so Up for sale everything goes!
Shipping not included... Seeing in Person and local pickup preferred!
-Mazda/Kia FE3 DOHC Engine 0 Miles $500
-Fresh Rebuild by Professional Mechanic
-ALL NEW, Bearings (rod and main), KIA factory oil pump, Water Pump, Timing belt and pulleys
-Freshly Honed with New Rings
-all new Seals
-ARP head studs
-COMETIC copper Head gasket
-Re-Lapped valves
-Stock internals good for 450hp
-Kia Sportage Coil on plug Setup
-Perfect for Miata Swap, or FWD Ford Probe MX6 GT SWAP.
-Over $1000 in the rebuild
-Comes with KIA Sportage Flywheel and re-worked engine wiring harness
-SPEC Stage 3 clutch for Kia FE3 flywheel $250
-6 puck sprung disc good for 400 ftlbs of torque
-Custom built with splines to bolt up to MX6 Probe GT turbo Trans OR Mazda RX7 Trans
-Brand New (bolted to Flywheel)
-Comes with Pilot and throw out bearings
-Cost me $365
-JGS precision Mazda FE3 Turbo Manifold $225
-Log style Mild steel
-Creamic painted with Heat Wrap
-for internally gated turbos
-Never Used
-set up exactly like the maita 1.6 manifold they make...fits, works,
-GSP T430 Turbo $225
-T3 Flange
-Brand New
-Good for 420HP and 25psi
-Internal Wastegate
-Comes with 2.5 v-clamp outlet and flange with flare to 3inch for downpipe
-Kia/Mazda FE3 Hybrid intake manifold. $150
-uses kia flange and runners w/ Accel injector bungs to use normal fuel injectors
-4inch Half round Aluminum Extrusion plentum
-CNC'd end cap threaded for 3 vacuum ports
-CNC'd Throttle Body Flange for Mustang Throttle body
-Comes with GT40 65mm TB and IAC
-Everything is fitted/but not welded...needs to be TIG welded together
***SOLD***-1st gen 88-92 Ford Probe Mx6 GT XTD 6 puck clutch $100
-6 puck sprung disc
-New
-splines the same as turbo RX7
-4inch Thick Front Mount Intercooler $100
-Brand New
-3inch inlets
-22x11x4 core
-S5 RX7 Turbo Transmission $250
-Rebuild done 40k ago
-comes with a shifter
***SOLD***-Apexi style Twin Chamber Blow off Valve $30
-Brand New
-Comes with steel Flange
-4 Delphi 780cc injectors $200
-Used for one season in a Drift car
I have an RX7 Turbo II rolling chassis for sale too!! 1200obo complete roller (no motor, trans, driveshaft)...perfect for LSX swap or something more awesome... like a 2jz or FE3 ... look in the "other F/S" section
Shipping not included... Seeing in Person and local pickup preferred!
-Mazda/Kia FE3 DOHC Engine 0 Miles $500
-Fresh Rebuild by Professional Mechanic
-ALL NEW, Bearings (rod and main), KIA factory oil pump, Water Pump, Timing belt and pulleys
-Freshly Honed with New Rings
-all new Seals
-ARP head studs
-COMETIC copper Head gasket
-Re-Lapped valves
-Stock internals good for 450hp
-Kia Sportage Coil on plug Setup
-Perfect for Miata Swap, or FWD Ford Probe MX6 GT SWAP.
-Over $1000 in the rebuild
-Comes with KIA Sportage Flywheel and re-worked engine wiring harness
-SPEC Stage 3 clutch for Kia FE3 flywheel $250
-6 puck sprung disc good for 400 ftlbs of torque
-Custom built with splines to bolt up to MX6 Probe GT turbo Trans OR Mazda RX7 Trans
-Brand New (bolted to Flywheel)
-Comes with Pilot and throw out bearings
-Cost me $365
-JGS precision Mazda FE3 Turbo Manifold $225
-Log style Mild steel
-Creamic painted with Heat Wrap
-for internally gated turbos
-Never Used
-set up exactly like the maita 1.6 manifold they make...fits, works,
-GSP T430 Turbo $225
-T3 Flange
-Brand New
-Good for 420HP and 25psi
-Internal Wastegate
-Comes with 2.5 v-clamp outlet and flange with flare to 3inch for downpipe
-Kia/Mazda FE3 Hybrid intake manifold. $150
-uses kia flange and runners w/ Accel injector bungs to use normal fuel injectors
-4inch Half round Aluminum Extrusion plentum
-CNC'd end cap threaded for 3 vacuum ports
-CNC'd Throttle Body Flange for Mustang Throttle body
-Comes with GT40 65mm TB and IAC
-Everything is fitted/but not welded...needs to be TIG welded together
***SOLD***-1st gen 88-92 Ford Probe Mx6 GT XTD 6 puck clutch $100
-6 puck sprung disc
-New
-splines the same as turbo RX7
-4inch Thick Front Mount Intercooler $100
-Brand New
-3inch inlets
-22x11x4 core
-S5 RX7 Turbo Transmission $250
-Rebuild done 40k ago
-comes with a shifter
***SOLD***-Apexi style Twin Chamber Blow off Valve $30
-Brand New
-Comes with steel Flange
-4 Delphi 780cc injectors $200
-Used for one season in a Drift car
I have an RX7 Turbo II rolling chassis for sale too!! 1200obo complete roller (no motor, trans, driveshaft)...perfect for LSX swap or something more awesome... like a 2jz or FE3 ... look in the "other F/S" section