Free 1.6 motor
#1
Elite Member
Thread Starter
iTrader: (7)
Join Date: Apr 2006
Location: VaBch, VA
Posts: 6,451
Total Cats: 322
Free 1.6 motor
Currently as you can see sitting on my workbench.
Everything is there except the injectors and a couple crank-pulley bolts.
Head/ValveCover/Intake/IAC/Block/OilPan/WaterPump/Oil Pump/Timing Belt/MotorMounts/Block-Tranny Gasket/PS-AC bracket... and a few bags of bolts and **** are all there.
I make no promises regarding anything about this motor.
It started pissing water into #3 so I changed the head gasket and it still pissed... probably got a slightly warped head. Bottom end was still strong, but I bought another motor so I didn't have to **** with it anymore.
First person who says they can come get it in Virginia Beach wins.
I will not ship.
It had 135k on it, full maint, always Mobi1 iirc.
-Sam
Everything is there except the injectors and a couple crank-pulley bolts.
Head/ValveCover/Intake/IAC/Block/OilPan/WaterPump/Oil Pump/Timing Belt/MotorMounts/Block-Tranny Gasket/PS-AC bracket... and a few bags of bolts and **** are all there.
I make no promises regarding anything about this motor.
It started pissing water into #3 so I changed the head gasket and it still pissed... probably got a slightly warped head. Bottom end was still strong, but I bought another motor so I didn't have to **** with it anymore.
First person who says they can come get it in Virginia Beach wins.
I will not ship.
It had 135k on it, full maint, always Mobi1 iirc.
-Sam
#2
If you change your mind i'll pay shipping and for any packing materials.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#9
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
Oh snaps, you got a 1.6 valve cover? I need, I need. Want to send it out to me? Gosh, I'll even pay you something for it, and the trouble.
Or want to pay a visit to that little bastard KPLAFIN for me? He's never sent the one I paid him for. Think he's close to you...
Or want to pay a visit to that little bastard KPLAFIN for me? He's never sent the one I paid him for. Think he's close to you...
#11
Elite Member
Thread Starter
iTrader: (7)
Join Date: Apr 2006
Location: VaBch, VA
Posts: 6,451
Total Cats: 322
If somebody comes along in the next week or so and wants the whole thing, I'd rather do it that way.
I think all it needs is the head milled and a new head gasket and it will go right back and work fine (again, no promises). The last compression check I did was before I put 10k boosted miles on it and they were in the 180's... but there's no telling what 14psi of bandaid tuning did to it in that amount of time.
For info, PlanetMiata sells a 1.6 longblock for $450... that you know came out of a running car. If you're planning on swapping it in as a replacement, then you've got the peripherals already and just need the longblock.
If I get no takers by the end of next week, I'll part the thing for the cost of shipping plus whatever a handle of Captain goes for. But shipping the block/head/pan would cost about half what a GUARANTEED motor from PlanetMiata would... then you need an HG and the head milled and there's no guarantee that after you do all the work that I didn't hurt the rings bad when a river of coolant flooded the #3 under high boost.
For now, anybody who wants everything in the picture above just needs to show up... next week we'll talk parts.
Until then, Brain has dibs on the IM, and Ben on the VC.
Levnibhin, I just wouldn't feel right shipping you this motor knowing you're probably gonna spend at close to $450 getting it running with no guarantees.
-Sam
I think all it needs is the head milled and a new head gasket and it will go right back and work fine (again, no promises). The last compression check I did was before I put 10k boosted miles on it and they were in the 180's... but there's no telling what 14psi of bandaid tuning did to it in that amount of time.
For info, PlanetMiata sells a 1.6 longblock for $450... that you know came out of a running car. If you're planning on swapping it in as a replacement, then you've got the peripherals already and just need the longblock.
If I get no takers by the end of next week, I'll part the thing for the cost of shipping plus whatever a handle of Captain goes for. But shipping the block/head/pan would cost about half what a GUARANTEED motor from PlanetMiata would... then you need an HG and the head milled and there's no guarantee that after you do all the work that I didn't hurt the rings bad when a river of coolant flooded the #3 under high boost.
For now, anybody who wants everything in the picture above just needs to show up... next week we'll talk parts.
Until then, Brain has dibs on the IM, and Ben on the VC.
Levnibhin, I just wouldn't feel right shipping you this motor knowing you're probably gonna spend at close to $450 getting it running with no guarantees.
-Sam
#12
I actually would only like to have it to stock pile it for a while. Im really only intrested in the guts. I have an completely empty block here. So all I would use is the crank, piston squiters and pistons. A spare head is a nice thing to have also.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#16
[QUOTE=samnavy;296689]You'll take it all and like it!QUOTE]
That's what I tell my girl too..
Will be there on the 30th and leave on the first, day or two at the beach and busch gardens and I can grab it on the way out of town. I'll bring a box for all the little ****. Pm me your info and I will give you a call when I leave so we can work out a time for pick up.
Time to go buy an engine stand.
That's what I tell my girl too..
Will be there on the 30th and leave on the first, day or two at the beach and busch gardens and I can grab it on the way out of town. I'll bring a box for all the little ****. Pm me your info and I will give you a call when I leave so we can work out a time for pick up.
Time to go buy an engine stand.
#17
Elite Member
iTrader: (9)
Join Date: Aug 2006
Location: Concord, North Carolina
Posts: 4,160
Total Cats: 6
Can I have my uncle pick it up? he is in Newport News...PM me your number. I'll have him call you.
Edit: Just saw this guys post...if he doesn't my uncle should be able to do it this up coming week.
Edit: Just saw this guys post...if he doesn't my uncle should be able to do it this up coming week.
Thread
Thread Starter
Forum
Replies
Last Post
bigmackloud
Miata parts for sale/trade
19
01-08-2021 11:24 AM
russian
Miata parts for sale/trade
6
10-08-2015 03:01 PM