1.8 Custom Turbo kit with very few miles <1000. Car ran a 12.7x@114 with the kit installed (although it had a Haltech ecu installed at that time)


* dual feed fuel rail shown in picture not included since I forgot it was for a 1.6

Miata 1.8 turbo kit. real garrett t3 (new 3/30 added pictures have all the info i have on this turbos specs), weld el manifold 2.5" downpipe and test pipe, real Tial wastegate, real BEGi fmu(afpr), starion intercooler with larger inlet/outlet, walblro 255 high pressure pump, j&s knock sensor or msd boost retard, some more extras I am forgetting...fits Miata without ps and air..as far as I know

-$1350obo
Craig M.
414.477.8 one one 7
or mankiew at gmail dot com
Located near Milwaukee, WI
local pickup preferred but I will drive up 100 miles to meet somebody
Will ship(really don't want to) if buyer pays all shipping costs

 

pm me if you decide to part out.

 

strongly prefer not to part.

 

do you know what hp this turbo is good for?

 

I don't have that info

I'll have to look up which t3 it is. @14psi running rich it trapped at 113.8 which is good for estimated ~250hp at the wheels.

 

That is an interesting air filter sir.

 

bump. a few new pics added of the turbo. let me know if you want any more pics or info

 

What does the wastegate dump to? At what RPM were you seeing boost/ full boost?

 

down toward the ground. I had plans to extend it. I never had the kit installed as I now have a 1.6 with a fMII. I believe the previous owner told me full boost 14 psi ~3500rpm

he only had it on the car for a short time ran the 12.7 @114 and then went with a far more radical setup and ran a 10.9x@139

 

If only this were for a 1.6L....

 

i like this. i'll be keeping my eyes open for more of these down the road. (gotta paint first)

 

i know u dont prefer shipping but, shipping cost to 91765?

 

I have no clue.

Does anybody have any info on shipping with Greyhound?


I just did a quick internet search...From the little info I can see somewhere around $100-150

let me know if you are interested,
Craig

 

Will the downpipe be in the way if i have ac and ps?

 

I can't say for sure. It was previously installed on a car without ps or air. I would assume it won'twork on a car with ps or air to be safe.

 

if only you would sell without the electronics/piggybacks id already have this

 

Interesting. What else would be needed to fit on a 96?

seanoconnellmail@yahoo.com

 

You'd need to make intercooler piping at least. Where are you located...since I STRONGLY prefer not to ship from Milwaukee.

 

> dat wastegate dump

how did it not melt anything?

 

Where in Milwaukee are you located? I wouldn't mind checking it out!