FS: Begi S3 Kit, 3" Enthuza, RX7 550cc, COPs, Protege Valve Cover
#1
Elite Member
Thread Starter
iTrader: (5)
Join Date: Mar 2007
Location: NYC
Posts: 1,970
Total Cats: 1
*Prices lowered* Begi S3 Kit, 3" Enthuza, Protege Valve Cover
Willing to meet people within 2 hours of NYC/Westchester Count to deliver parts. PM me if interested.
First off is a Begi S3 kit which is complete minus a couple screws and worm clamps you can pick up from any hardware store. You will also need to get new nuts for the turbo to downpipe connection. The kit has the #2 intercooler (I don't remember the measurements at the moment), stainless lines, and a stainless downpipe that has the 2.75" flange, but the bolt holes have been widened to mate with a 3" cat or a 2.75" cat. The turbo is a gt2560r. The kit has about 10k miles on it and the turbo has about 8k because I replaced the original gt2860rs for the this (and much prefer the gt2560r).
There are three minor issues. One of the intercooler pipes has rust (it is out of site completely, under the front driver's side bumper). It is surface rust that could be cleaned and re-powder coated, or could easily be replaced by an ebay part. It's the simplest bend in the kit, a "C" shape. Another issue is that Begi's replacement water outlet has a pinhole leak in the weld. It could easily be fixed with some JB weld and spray paint. I only noticed it once it was installed and it leaked so little that I never bothered fixing it. The last issue is that one of the braided lines chafed the coldside of the turbo housing. It's only a cosmetic issue but I don't want it to be a surprise. I'd like to see if I can sell the kit complete and locally before I'd consider parting it or shipping. $2000
Next up is a 3" stainless Enthuza cat back with their 3" metalcore cat. Same mileage as the turbo kit, about 10k. The only issue is a small dent which you can see in the picture. $400
RX7 550cc Plug and play injectors. SOLD
Toyota COPs, SOLD
Protege Valve cover. Dirty, and paint is chipping in some parts, but the vent position has been changed already so it's plug and play for those without COPs. $45 shipped.
First off is a Begi S3 kit which is complete minus a couple screws and worm clamps you can pick up from any hardware store. You will also need to get new nuts for the turbo to downpipe connection. The kit has the #2 intercooler (I don't remember the measurements at the moment), stainless lines, and a stainless downpipe that has the 2.75" flange, but the bolt holes have been widened to mate with a 3" cat or a 2.75" cat. The turbo is a gt2560r. The kit has about 10k miles on it and the turbo has about 8k because I replaced the original gt2860rs for the this (and much prefer the gt2560r).
There are three minor issues. One of the intercooler pipes has rust (it is out of site completely, under the front driver's side bumper). It is surface rust that could be cleaned and re-powder coated, or could easily be replaced by an ebay part. It's the simplest bend in the kit, a "C" shape. Another issue is that Begi's replacement water outlet has a pinhole leak in the weld. It could easily be fixed with some JB weld and spray paint. I only noticed it once it was installed and it leaked so little that I never bothered fixing it. The last issue is that one of the braided lines chafed the coldside of the turbo housing. It's only a cosmetic issue but I don't want it to be a surprise. I'd like to see if I can sell the kit complete and locally before I'd consider parting it or shipping. $2000
Next up is a 3" stainless Enthuza cat back with their 3" metalcore cat. Same mileage as the turbo kit, about 10k. The only issue is a small dent which you can see in the picture. $400
RX7 550cc Plug and play injectors. SOLD
Toyota COPs, SOLD
Protege Valve cover. Dirty, and paint is chipping in some parts, but the vent position has been changed already so it's plug and play for those without COPs. $45 shipped.
Last edited by johndoe; 08-31-2009 at 09:27 PM.
Thread
Thread Starter
Forum
Replies
Last Post
kronikker
Miata parts for sale/trade
17
10-06-2015 10:18 PM